Please suggest how to calculate the selectivity coefficient and relative selectivity coefficient of an electrode, whose response have been voltammetric method.
*obtained by
Hello Trisita Nandy Chatterjee
Selectivity to?
Are we talking ion-selective electrodes? If so, see the attached article and the methods section and the following:
https://www.jstage.jst.go.jp/article/analsci1985/4/2/4_2_149/_pdf
Or for instance, class-selective enzyme electrodes:
Article Selectivity coefficients of class-selective enzyme electrodes
Can we measure the bulk composition of biomolecules present within an algal sample directly by placing its powdered form on a FT-IR spectroscopy stage? Or does it require a particular kind of...
30 January 2021 2,303 4 View
I want to plot the distribution curve of dipole moment as a function of angles between dipole vector and solid surface in the presence of external electric field. My system is consisting a...
17 January 2021 1,508 4 View
Working in an FDG production lab for around 20 years. Does the annual ICRP dose limit of 20mSv/Year avegraged over 5 years (and in a single year upto 50mSv) is following the ALARA principle. Does...
07 December 2020 404 5 View
I need to dissolve 1.5gm of PVDF tablets (from Sigma ALdrich) in 25gm of n-n DiMethyl Acetamide (DMAc) solvent. I have stirred the solution for 2 hours using magnetic stirrer and it did not seem...
02 December 2020 1,777 3 View
I have a PEM cell dataset, and I want to plot the degradation curve or polarization curve using machine learning algorithms. How can I approach in this regard. I have to design an algorithm to do...
18 October 2020 7,909 2 View
07 October 2020 8,119 6 View
A particular gene (gene A) is reported to be downregulated in cancer cells as compared to the normal cells. How can you prove this with the help of PCR?
27 September 2020 5,292 4 View
Free toxicity prediction software based on genetic algorithm and deep learning of some training dataset #toxicity #Freesoftware #insilico #Deeplearning
30 August 2020 7,950 4 View
Currently I am using dpm particle tracking in Fluent to trace some particle .After the completion of the simulation, how can I obtain the concentration versus time curve at the outlet?
28 August 2020 9,962 3 View
I am looking for a new mixture template which is not in the data base of Ansys Fluent species transport model. How could I add new template?
25 August 2020 6,340 2 View
I am using a Sutter electrode holder for my patch clamp experiments, but I'm having trouble keeping positive pressure inside my electrode due to a leak out of the back of the holder. I have added...
02 March 2021 5,829 1 View
I want to do RF sputtering of ITO on glass substrate using magnetron sputtering. what thickness do i need to make it good conductive layer to use it for PSC. Moreover, whats about thickness of...
01 March 2021 395 3 View
I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...
27 February 2021 1,829 3 View
During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...
25 February 2021 7,994 3 View
I am trying to characterize an electrochromic system. The system uses ITO electrodes on glass, WO3 as the electrochromic film, and NiO as the ion storage layer. When I deposit NiO and WO3 and...
23 February 2021 9,592 2 View
What are the testing rate for electrodes recommended by ASTM for cochlear implants. I am currently doing the 15mm/min elongatio testing.
22 February 2021 1,515 1 View
One of my colleagues said, "the impedance you can measure with the three electrodes and with the specific sequence varying the frequency" Is it possible to configure the potenciostat without the...
21 February 2021 418 2 View
Hello everyone Do you have any information about this error 'The experiment was stopped by a potential overload on Vs (auxiliary electrode)' in Origamaster software? I tried everything possible,...
19 February 2021 3,152 7 View
The experiment is really simple. When I do a bulk electrolysis with 1% TFAA (ACN solution) to get dihydrogen, what is going to be oxidized? (working electrode graphit, counter electrode platinum,...
18 February 2021 4,430 1 View
I am working on cathode material. I have made different Li-ion coin cell against Li metal using commercial available cathode materials such as LCO,LMO, LFP and NMC and also with the lab...
18 February 2021 1,450 3 View