Any references about insects or animals that can damage or weathering of rock or fossil material?

Are there any references to insects or animals that can cause damage or weathering to the rock or fossil material? books or paper that would be nice. Thank you very much!

24 February 2021 6,805 3 View

How to prepare a liquid sample for FTIR spectrum?

I have a ethanol-water 50% extract of mango peel. I purified mangiferin from the extract with filtration and precipitation. so i obtained a low concentrated extract which i want to se the IR...

24 January 2021 8,880 7 View

How can I find the best subject between architecture, economy, historical site ?

Hi there, I consider to write my final thesis in master architecture. I am trying to find a good link between economy impact , historical site and high rise buildings which I am interested in, but...

16 November 2020 4,682 16 View

Could you assist us by filling out this short survey for online instructors?

Dear colleagues, If you have shifted from teaching face-to-face to teach online, due to the COVID-19 pandemic, we would appreciate your cooperation in filling-up this short...

12 May 2020 8,532 48 View

Agarose amount in serum protein electrophoresis?

I have Mini gel tank from life technologies, I want to use it for my serum electrophoresis. Does anyone have idea about how many percentage of ready to use agarose need to order for the SPE?

26 February 2020 8,793 3 View

Do you think theoretical thematic analysis can fit with a critical realist ontology constructivist epistemology?

15 February 2020 1,397 6 View

Why does some materials adsorb cationic dye but not anionic dyes?

While doing photocatalytic dye degradation i observed some materials decreases the concentration of cationic dye but increase the concentration of anionic dye.

28 January 2020 2,986 3 View

V-REP & Python for trajectories?

I plan to use V-REP together with python for the development of trajectories in 3D CAD models, the path I will trace on the CAD file and generate a DXF file of it, Python would process it to enter...

06 November 2019 5,699 2 View

Can someone help me with instructions to mount 3D CAD files in ROS MoveIt?

I am new to using ROS MoveIt, I want to know how to load 3D CAD files of industrial parts to perform the actuator trajectory based on the cad file.

16 October 2019 5,351 2 View

Can anyone suggest a method to synthesize LLZO (Li7La3Zr2O12) for solid electrolyte of Li ion battery?

The garnet like LLZO is prepared mainly through solid state reactions. Can anyone suggest me a method other than solid state method to synthesize LLZO?

29 September 2019 9,630 5 View

Which is the most efficient etching solution for nickel based alloys?

Which solution reveals the microstructure and features of nickel-based alloys?

02 March 2021 2,221 3 View

How to remove the residual PDMS on the silicon mold?

Incompletely cross-linked pdms are difficult to remove.

01 March 2021 798 3 View

How to size battery banks?

I am designing a small grid connected solar PV power-plant. As the battery's capacity is specified in Ah and demand in kWh. What is the best way to size the battery bank? I have battery price in...

28 February 2021 1,638 3 View

How to model the battery pack in PSIM or PSCAD?

Hello, I have simulated a single battery cell using Thevenin equivalent circuit. For a battery pack, I have a large number of cells connected in series and parallel connections. Is there any way...

28 February 2021 2,116 1 View

How to calculate battery consumption for IoT device?

Hi, everyone I'm working on a privacy-preserving algorithm that will apply to IoT devices. So, I need to measure the power consumption by implementing this algorithm. Any suggestion, advice,...

25 February 2021 8,749 6 View

How the Ground Plane implantation is performed without damaging (and w/o varying the undoped nature) the top Si (8-10 nm) in FDSOI technology ?

It is a general practice to introduce Ground Plane in FDSOI devices under the BoX. The Ground Planes are introduced by Ion Implantation through Top Si layer and Buried Oxide. I wanted to know that...

24 February 2021 5,974 4 View

How to delaminate copper in water-based anodes?

Hello everyone, I'm looking for a way to delaminate copper current collector of water-based anodes in Li-ion batteries without damaging the graphite film. I tried different materials such as HNO3...

24 February 2021 3,785 3 View

How to determine solutionizing time for cast Al alloys?

For wrought alloys soaking time at solutionizing temperature is determined by thickness .Do we have such standards for cast Al alloys

23 February 2021 8,839 3 View

Can't recognize exact phase and PDF card no of Silicon carbide in XRD?

We have deposited silicon carbide on carbon substrate using one PVD technique. Due to amorphous behavior of SiC at low deposition temperature, we performed heat treatment of those films at...

22 February 2021 2,072 3 View

Which thermal conductivity test recommended for Ag-Cu nanofluid?

I have prepared Ag-Cu alloy with polymer coating upon it.... how can I measure thermal conductivity of it ?

22 February 2021 5,915 3 View