31 January 2022 2 3K Report

I'm modeling the habitat suitability of a species. I know that you can project the model to future scenarios when setting up the modeling, but can you project your maxent model to future scenarios after the modeling is complete?

More Filip Varga's questions See All
Paleo climate layers for WorldClim 1.4?

Hi everyone, I'm trying to download the Paleo climate layers for WorldClim 1.4 from the official site: https://www.worldclim.org/data/v1.4/paleo1.4.html But all links seem to be broken. Does...

14 July 2024 5,777 1 View

Why are tensile tests of rolled sheets preferably performed on samples parallel to the direction TD and not RD? What makes it more critical?

Why are tensile tests of rolled sheets preferably performed on samples parallel to the direction TD and not RD? What makes it more critical? This preferable orientation is used in papers, and also...

04 May 2024 7,390 1 View

What percentage of landmass domestic gardens cover in the European Union?

I am wondering what percentage of the total landmass in the EU is considered as domestic/private gardens (with or without allotments/community gardens), but not limited to data solely from...

13 February 2024 4,171 4 View

How to claculate Moduli from obtained MSD?

Hello everyone, I am looking for simple program to calculate storage and loss modulus from MSD (obtained from FCS measurements). Can anyboby help or provide link? Than you very muc.

10 October 2023 495 3 View

How to desig ann online platform for assessing climate in multicultural schools?

Please provide any ideas or comments regarding needs of schools attended by foreign students in your country.

12 August 2023 2,945 1 View

How to desig ann online platform for assessing climate in multicultural schools?

Please provide any ideas or comments regarding needs of schools attended by foreign students in your country.

12 August 2023 9,855 1 View

Is it still available QuickFit program (version 3.0, evaluation of FCS)?

Does anyone happen to know if there is still an installable Windows version of the QuickFit program (version 3.0, evaluation of Fluorescence Correlation Spectroscopy)?

02 April 2023 383 0 View

Can alkyl chloroformates undergo Friedel-Crafts acylation with arenes?

I plan on using ethyl chloroformate in particular, and that with a phenyl ring. Would this be plausible? I would assume the resonance participation of the adjacent, ester oxygen would stabilize...

04 December 2022 5,152 0 View

Can chloromethyl pivalate, and any beta-haloketones/esters, undergo Friedel-Crafts alkylation?

I require a Friedel-Crafts reaction with chloromethyl pivalate as my reagent, and an alkyl benzene - I couldn’t find any literature on this reaction on the web. I was wondering if anyone had any...

30 October 2022 285 3 View

What are the recommended laboratory conditions (temperature, humidity, etc.) for the NanoDrop?

Hello, my section at my department has purchased the NanoDrop instrument and we are currently debating where it will be located. One of the suggestions was in an open air laboratory, which has me...

29 June 2022 6,647 0 View

Similar questions and discussions
How can I prepare virus for a TEM or SEM imaging?

I have virus (viral hemorrhagic septicemia virus) in suspension and the experiment will not involve cells. What level of TCID50 is preferred?

11 August 2024 3,115 1 View

Handling Missing Data and Building a Predictive Model with Incomplete Information ?

I am developing a predictive model for a water supply network that involves 20 influencing points. However, I only have historical data for 10 out of these 20 points. I would like to know how to...

10 August 2024 4,005 2 View

Is it possible to use the Fused Deposition Modeling (FDM) to additively manufacture interconnected porous structure generation of >100-200 micrometer?

Usually, additive manufacturing techniques like SEBM, SLS, and SLM are used for interconnected porous lattice structure generation with sizes of >100–200 micrometers. Can the Fused Deposition...

09 August 2024 7,892 0 View

How to define an anisotropic material with asymmetric elastic compliance/stiffness matrix in ANSYS APDL?

I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...

09 August 2024 5,048 2 View

How can I apply boundary conditions in an orthotropic steel deck numerical model using ABAQUS software?

I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...

08 August 2024 719 0 View

Can you suggest reliable sources defining "3D mesh" and "3D city models"?

Dear fellow researchers, I am currently working on a paper where I need to provide a reliable reference that defines and distinguishes between 3D mesh models and 3D city models. Although I am...

06 August 2024 9,986 2 View

Please explain how the plastic input value should be considered from the true stress-strain curve for the bilinear elastoplastic material model ?

I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...

05 August 2024 454 3 View

What are the shear and normal stiffness values of an LLDPE liner in 3D numerical modeling of a stockpile?

I am seeking experimental or applicable data for the liner (LLDPE) interface in FLAC3D numerical modeling of a large stockpile. Could you please recommend suitable references? The preferred data...

05 August 2024 3,665 0 View

Is it necessary to covary exogenous constructs in a structural model?

I am working on a SEM model where i have 7 latent variables (6 exogenous and 1 endogenous). In AMOS when I co-vary the exogenous constructs, only 2 paths are coming significant out of 6. But when...

03 August 2024 6,028 4 View

Given the current level of natural phenomena cause by the climate change and environmental pollution, will the AI find the technological solutions?

AI-driven technologies offer previously unheard-of capabilities to process enormous volumes of data, extract insightful knowledge and improve predictive models, according to the UN’s World...

31 July 2024 9,733 3 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close