Polypropylene fibers vs temperature?

28 March 2018 0 135 Report

Good day to all.

I am looking for representative curve/curves for polypropylene fibers tenacity or tensile strength in relation to varying temperatures for a project involving PP fiber reinforced composites.

More specifically I am interested in the effect of temperature on the elongation values for PP fibers/filament or yarns.

Thank you all in advance

Badges
Science topic

More Dimitris Baltzis's questions See All

Does anyone know how to help me increase the sample rate?

I have this program and I use an mpu6050 connected to an arduino uno and store the accelerometer values. my problem is that the maximum sample rate I can get is 65Hz up to and with a baud rate of...

18 May 2024 644 5 View

How to dilute LPA in culture media?

Hello everyone, I work with lysophosphatidic acid (LPA) in cell culture. I have diluted lyophilized LPA in chloroform, but i have some problems when i add it to culture media (DMEM). Thank you...

03 October 2023 8,090 0 View

How to achieve s11 200MHz bandwidth?

I have to build in cst studio (student edition) a patch antenna with a coaxial. The ground and the dielectric must be 100x100 mm. The metal thickness must be 0.035mm and as dielectric we use a...

20 May 2023 7,330 0 View

How do I check robustness of sensitivity analysis in Mendelian Randomization?

Hello everyone, I am performing a Mendelian Randomization in R to check whether there is a causal association between genetically predicted eGFR and severe COVID-19. In the end of my analysis I...

20 April 2022 2,034 1 View

Global Warming is suposed to be due to Greenhouse gases. But new approaches indicate climate variability is due to natural causes?

New approaches indicate climate variability is due to natural causes. GCMs fail to explain climate variability, as they are blind to solar variations. NASA keeps posting graphs of TSI ignoring the...

06 August 2020 4,730 5 View

High accurate low error current sensing circuit?

Hi all, It's my first question there. I'm working on a project in which I want to make a current sensor in range of 0-1.5A. I think that the best method is with a current sensing amplifier and a...

12 July 2020 5,893 0 View

How can Kneser-Ney Smoothing be integrated into a neural language model ?

I found a paper entitled "Multimodal representation: Kneser-Ney Smoothing/Skip-Gram based neural language model". I am curious about how the Kneser-Ney Smoothing technique can be integrated into a...

29 June 2020 8,396 4 View

How to define Secant and Tangential Stiffness Matrices for Nonlinear analysis using 3-node axial (rod) finite elements?

I am trying to program a Newton-Raphson Nonlinear solver for Material nonlinearities (i.e. bilinear material) and i don't know how to define Tangential and Secant Young Moduli since the 3-node...

14 February 2020 6,587 4 View

MS/MS collision gas operational cost?

Would it be possible to give an estimated of the operational cost or possibly the amount of gas required (Helium/Argon) for approximately 8-10,000 samples a month? Each sample will have around...

21 April 2019 9,534 0 View

Aquaponics or Aeroponics have higher efficiency for commercial ventures?

Which one has higher yield? Which ones are more commercially viable? Which needs less water and use of electricity?

07 April 2019 6,964 11 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

GC-MS retention index prediticon?

Hello experts, Does anyone know any free software about retention index prediction ?

08 August 2024 7,403 2 View

Is there an alternative to a multinomial regression which allows the DV to be non mutually exclusive?

I am trying to analyse data from a survey examining what variables affect teachers perceived barriers to incorporating technology into their classroom. I have 5 predictor variables however my DV...

06 August 2024 1,752 3 View

Why do we equate male and female arousal?

Women, on the other hand, can become physically aroused (increased blood flow in the reproductive organs) without becoming psychologically aroused even in the slightest. (Robert Weiss)

05 August 2024 9,537 2 View

Can anyone explain why there is not any color bands in the middle portion of the tensile coupon?

Details of the Analysis. Static Analysis Composite Layup Continuum Shell Elements FRP Material (Elastic and Hashin Damage)

03 August 2024 8,538 4 View

London dispersion in CCl4 vs the dipole-dipoles force strength in CHCl3?

How do you tie-break and rank these two in their strength?

03 August 2024 4,471 1 View

What are the limitations and challenges of using machine learning for predicting concrete compressive strength in practical applications?

Machine learning (ML) has shown great potential in predicting the compressive strength of concrete, an important property for structural engineering. However, its practical application comes with...

03 August 2024 2,546 2 View

I need the datasets of Microgrid for system identification?

Hi I am working on data driven model of the microgrid, for that, i need the reliable datasets for the identification of MG data driven Model. Thanks

02 August 2024 5,748 4 View

Should I remove an item from a scale to raise Cronbach's alpha and McDonald's omega or is it better to leave it if they are both over .7 already?

Hello! I have this scale which had 10 items initially. I had to remove items 8 and 10 because they correlated negatively with the scale, and then I removed item 9 because Cronbach's alpha and...

01 August 2024 4,606 7 View

Talking therapies for bipolar, psychology?

what is the best research evidence for psychological interventions for Bipolar?

01 August 2024 6,023 2 View