Polymer conductive coating on another polymer substrate?

More Hesam Rabiee's questions See All

Tin electrodeposition on Cu and carbon ?

hi all, i am trying to electrodeposit Sn on Cu, and some carbon substrate. my electrolyte is SnCl2.2H2O in a 2M KOH solution. i notice that after adding SnCl2.2H2O to KOH solution a very...

07 August 2019 9,180 3 View

2 electrode cell vs. 3 electrode cell for CO2 reduction reaction?

Hi All, i want to study electrochemical reduction of CO2 on my catalysts. what is the difference to use a 2-electrode cell or 3 electrode cell with a reference electrode? is it necessary to use a...

02 March 2019 4,970 5 View

Particle immobolization via dopamine platform?

Hi All, i want to use polydopamine coating as a layer for immobilisation of Amine functionalised particles through Michael addition. i have seen this approach in a few paper for both particle...

08 September 2018 4,494 0 View

Polymer-MWCNT conductive composite?

Hi all, i have been trying to make polymer-MWCNT conductive composite but have not been successful and composite still has high resistance. do you think the type of polymer matters? i have...

06 July 2018 2,207 5 View

Hollow Fiber dip coating and drying procedure?

Hi All, Regarding to coating of hollow fiber membranes by a polymeric solution in the lab, should the fibers be immersed vertically or horizontally? what about this direction for drying after...

05 June 2018 9,877 1 View

Dopamine as glue ?

Hello all, does anyone know if dopamine/polydopamine can be used a glue to hold other materials (like particles) on the surface of a substrate in aqueous solution? i need to know if the particles...

05 June 2018 914 0 View

Thin film hollow fiber PDMS membranes?

Hi, Does anyone know where to buy composite hollow fiber membranes/modules with a thin layer of PDMS?? most of the suppliers have thick PDMS membranes with thickness from 50 to 100 micrometer....

04 May 2018 4,573 4 View

How to calculate the Osmotic pressure of a microgel suspension?

Hello i need to calculate the osmotic pressure of a suspension containing microgels. the microgels are of poly (DEAEMA) and polymerization was via surfactant-free emulsion polymerization. is...

02 March 2018 5,575 3 View

What is the difference of solvation behavior between non-ionic and ionic polymers/hydrogels in water ?

what is the difference of solvation behavior between non-ionic and ionic polymers/hydrogels in water? for example between poly NIPAM and poly (diethylaminoethylmethacrylate).

07 August 2017 5,729 3 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

How do I conformally do PR spin coating on trench structure?

I did PR spin coating on trench structure. I used AZ P4620 PR and the thickness or PR is around 11um. The substrate is Si. And my trench structure depth is 141um(negative way). Even though I...

08 August 2024 2,298 0 View

How to increase simulation box size?

We intend to study the interaction between peptides and polymer (like PP, PE and PS) through MD simulations using Martini force fields ( Martini 2 for PP and Martini 3 for PE, PS). We have...

08 August 2024 4,842 0 View

Why do i have a weak plasma and no coating during rf sputtering?

I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.

07 August 2024 4,526 4 View

How to heat polymer for about 130° without oil bath ?

is there any other way to heat a polymer evenly other than oil bath if so what are those and how to use it

06 August 2024 947 1 View

Polymer wear calculation?

What is the method for analytically calculating the wear and service life of polymer-polymer sliding pairs?

04 August 2024 1,078 1 View

What is the reason I get 400nm nanoparticles using an extruder with 200 nm membrane for cell membrane coating?

I am trying to coat my micelles and PLGA based nanoparticles with cell membrane using an Avanti mini extruder according to literature . I use 200nm membrane but my particles end up to be 400nm And...

30 July 2024 3,294 3 View

How to explain the different interaction between soluble and insoluble polymer in water?

Hello everyone, I am try to understand the differences interaction between insoluble and soluble polymers in water with metal ions and how theit charge density (of metal ions) affect the interaction.

29 July 2024 6,350 3 View

Why is it not common to see similar pairs in polymer sliding pairs?

If the pairs are similar, will it reduce the adhesion due to electric charges?

29 July 2024 3,185 2 View

HAs anyone used TGA to find activation enegy of water evaporation?

I have different polymer solutions and I hypothesize that water molecules are retained based on the water-polymer interactions, so the amount of free water is less to intercat with drug tablet....

28 July 2024 9,545 6 View

Raul D. Rodriguez

Hi! I'm interested about your question, we just found a way to coat a polymer dielectric substrate with another conductive polymer film. The structure is also water-proof.

What is the application you're thinking about?

Hesam Rabiee

good, is it possible to share your thoughts with me ?

my application is related to energy storage field.

Sure, the thing is that this method we just discovered is being prepared for publication so I cannot make the details public yet.

We can discuss by email if you wish