Is there any analytical model present for selecting the concentration of nanoparticles for anaerobic digestion?

More Syed Asad Ali Zaidi's questions See All

How to deal with nanoparticles containing waste?

Dear all, I am curious about the distribution of nanoparticles in the anaerobic digestion system, especially, in the wastes. And also, how to deal with the wastes with these pollutants after the...

31 December 2018 7,323 11 View

How to calculate mass balance based on feedstock molecular weight to determine biogas composition and account for losses and carbon not recovered?

How to calculate mass balance based on feedstock molecular weight to determine biogas composition and account for losses and carbon not recovered? Regards,

07 August 2018 10,097 2 View

What methods can be used to measure Carbohydrates and Proteins in micro-algae?

I have green micro-algae (Enteromorpha) powder and want to measure the carbohydrates and proteins before and after the anaerobic digestion of this micro-algae with anaerobic sludge. Please...

02 March 2018 3,656 10 View

Can anyone suggest a good book on Florescence In-situ hybridization and FQ-PCR used for microbial analysis?

Thanks and Regards,

10 November 2017 6,342 1 View

What techniques or methods one can use to find different behavior of same microorganism with different substrates in Anaerobic digestion?

I used four different substrates and inoculated them with four different types of nano particles. I found that the same microorganisms behave differently in the presence of the same NPs, but with...

10 November 2017 8,874 4 View

What are the ways to measure cellulose and hemicellulose?

Which one is the easiest way to measure them

03 April 2017 6,195 2 View

Graphene Oxide Nanoparticles

Kindly anyone please share the method of preparing graphene oxide nanoparticles. Thanks

01 January 1970 4,685 12 View

Is it always better to have more choices?

Dear colleagues, your opinions and comments are welcome.

01 January 1970 4,035 31 View

Biogas plant optimum economic size

What is the optimum size of a biogas plant at which the cost per cubic meter is minimum? Thanks

01 January 1970 5,760 3 View

Most of the world’s power still comes from burning carbon. Can we substantially decarbonize?

What are the challenges and outlooks?

01 January 1970 8,740 4 View

How can I prepare virus for a TEM or SEM imaging?

I have virus (viral hemorrhagic septicemia virus) in suspension and the experiment will not involve cells. What level of TCID50 is preferred?

11 August 2024 3,115 1 View

Baseline drift in HPLC? What causes this?

Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!

11 August 2024 3,770 4 View

Handling Missing Data and Building a Predictive Model with Incomplete Information ?

I am developing a predictive model for a water supply network that involves 20 influencing points. However, I only have historical data for 10 out of these 20 points. I would like to know how to...

10 August 2024 4,005 2 View

Is it possible to use the Fused Deposition Modeling (FDM) to additively manufacture interconnected porous structure generation of >100-200 micrometer?

Usually, additive manufacturing techniques like SEBM, SLS, and SLM are used for interconnected porous lattice structure generation with sizes of >100–200 micrometers. Can the Fused Deposition...

09 August 2024 7,892 0 View

Hello researchers Is this a random laser or just fluorescence?

I am using Rhodamine6G as gain medium and silver nanoparticles as scatterers on a microscope slide and laser input 532 nm comes from above.

09 August 2024 9,894 2 View

How to define an anisotropic material with asymmetric elastic compliance/stiffness matrix in ANSYS APDL?

I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...

09 August 2024 5,048 2 View

How to calculate CCS for Sodiated adduct ions and Multiply Charged Ions?

I'm currently working on calculating the collision cross section (CCS) for various ions, and I'm facing challenges when dealing with sodiated and multiply charged ions. Most of the resources I’ve...

08 August 2024 8,329 0 View

How can I apply boundary conditions in an orthotropic steel deck numerical model using ABAQUS software?

I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...

08 August 2024 719 0 View

How to prepare the nanoparticle treated fungal sample for Environmental SEM analysis?

A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.

07 August 2024 5,307 1 View

Can you suggest reliable sources defining "3D mesh" and "3D city models"?

Dear fellow researchers, I am currently working on a paper where I need to provide a reliable reference that defines and distinguishes between 3D mesh models and 3D city models. Although I am...

06 August 2024 9,986 2 View

Yanh Peng

I am sorry that recently I have been busy with no time to view the mailbox.my work is researching the turbochager system in diesel.So i do not have any analytical model present for selecting the concentration of nanoparticles for anaerobic digestion.

Kashif Mushtaq

Check this article . It has analytical model for selection of concentration of NPS and they have used it for biomedical engineering.

Syed Asad Ali Zaidi

Thank you @Kashif Mushtaq

To know the concentration of NPS . . you can use these as well. .

Inductively coupled plasma atomic emission spectroscopy:

The intensity of this emission is indicative of the concentration of the element within the sample. Details are on the following links.

https://en.wikipedia.org/wiki/Inductively_coupled_plasma_atomic_emission_spectroscopy

http://www.rsic.iitb.ac.in/icp-aes.html

Thank you. But in my case i have to do the selection for concentration of nanoparticles rather than to know it.

If you find some information related to it then please share.

Thanks again