Is there a photoionization efficiency database?

18 August 2020 0 5K Report

Looking for gas phase PIE curves compiled in one database. Mainly interested in 6-15eV photon energies.

Badges
Science topic

More Pavlo Maksyutenko's questions See All

What for is saturrated sodium chloride solution in ISO 12966-2 ?

Hi, everyone. Our lab is going to use ISO 12966-2 and 12966-4 and there is one moment in sample preparation (rapid transmethylation method under alkali-catalysed conditions) that I can't...

15 September 2020 3,229 4 View

Is there some correlation beetween thermodynamic functins and hardness of refractory compounds ?

The problem statement is a prediction some mechaninacal properties of MC type carbides solid solutions using CALPHAD.

16 January 2020 4,760 2 View

How to deal with a mismatch in 12'' CF flanges?

My turbomolecular pump (Leybold) and vacuum chamber (Pfeiffer) have difference in knife edge diameter of ~0.5 mm. This results in a noticeable camber in the used gasket and the pressure not going...

23 September 2018 9,077 3 View

Do I need a wedge in KBr windows in my FTIR setup?

I am in the process of building a new setup and have a discussion with my colleague on the subject. We will measure several monolayers on a flat reflective surface inside a vacuum chamber with ~1...

08 August 2018 9,301 2 View

Multiscale modeling of steel microstructure

Hi, I'm in interested in contacts with scientists who are involved in steel microstructure multiscale simulation during thermo-mechanical treatment, namely, for severe plastic deformation (SPD)

11 January 2011 5,236 3 View

After a reference from Int J Body Compos Res, can any body help?

Hi, I am after the reference below, my library says it cannot obtain a copy either locally or internationally, any help appreciated! Chris Wang ZM, Heshka S, Wielopolski L, Pi-Sunyer FX, Pierson...

03 March 2021 6,193 1 View

Irradiation data for JAPAN?

Hi, Could you help me to get the latest (2019, 2020) solar resource data for a particular site in JAPAN? PV GIS and NSRDB data are not in reach to JAPAN, I'm looking for some other database for...

03 March 2021 961 3 View

How can I integrate a routing protocol in a tiny device (e.g. Raspberry Pi)?

Hi Community, I'm facing the issue of integration/compiling a new routing protocol in a WSN simulator. The final goal is to successfully add, configure this routing protocol in hardware devices...

01 March 2021 9,332 6 View

Any research papers for extraction of nutrient deprivation on macroalgae? Analysed by HPLC-UV and GC/MS. Possibly from macroalgae genus Rhizoclonium?

I am doing my thesis on the nutrient deprivation on the macroalgae Rhizoclonium sp. I will be analysing the levels over a period of roughly 5 days by HPLC-UV and GC/MS. I will be using seawater as...

28 February 2021 6,477 1 View

Necessary tube lenght to cool Natural gas in a dry-ice cooling bath?

I have a tank which contains natural gas at 250 Bar and 293 Kelvin. I want to cool the gas in a dry-ice cooling bath to about 195 Kelvin. The gas will flow in a copper-tube through the bath with a...

27 February 2021 8,128 1 View

How to calculate Ligand-active site distance in a ligand-protein complex from MD simulation?

I have run a MD simulation of a ligand-protein complex in GROMACS using CHARMM forcefield. Reviewer has asked me to calculate Ligand-activesite distance and binding free energy of ligand with...

27 February 2021 4,703 1 View

Exit velocity of natural gas from pressurized tank?

Hi Guys. I'm a mechanical engineer and have a bit trouble, would be very glad if you could help me with my questions. I have a pressurized tank which contains Natural Gas at 200 Bar and 293...

26 February 2021 6,253 3 View

Gas sensor response and recovery time independant of flow rate and chamber volume?

I am trying to obtain the response and recovery times for my gas sensor device. It appears the the response/recovery times are primarily dependant on the flow rate of the gas I inject into the...

26 February 2021 1,511 3 View

Why do a weight decrease for thermal degradation in nitrogen gas condition?

Hi all The question is related to TGA(Thermogravimetric analysis). Thermal degradation easily understood but why do samples weight decrease? altough just binding is broked, the weight of...

26 February 2021 1,100 5 View

Why do the air flow results vary totally when adding scalar in CFD ?

Dear All, We are using Autodesk cfd to calculate the air flow in a single sided naturally ventilated room, where air flow depends only on buoyancy due to temperature difference between inside and...

25 February 2021 9,602 4 View