I have a problem, in additive manufacturing (here specifically LPBF), if you make parts with different shapes through a fixed printing process, the parts will deform due to different geometry resulting in different stress concentrations. However, for the same shape of the part, the use of different printing process parameters to manufacture the part, will have an impact on its deformation? Such as different laser power, scanning rate, etc. (of course, if the part can be successfully manufactured)
Bu yapacağınız çalışmaya bağlı. Ne kadar çok değişken parametre varsa üretim o kadar zordur.
There are many design considerations that must be evaluated when designing for additive manufacturing. These considerations generally focus on geometric and support constraints and change as technology advances.
Hi,
Yes, of course, this issue was discussed in section 4.2 of this paper:
https://doi.org/10.1007/s12540-023-01444-4
- Badges
- Science topic