Hi Sheikh Mohd Iqbal S. Zainal Abidin,

Try to use 76.11 Controlling reference point display

http://dsk.ippt.pan.pl/docs/abaqus/v6.13/books/usi/default.htm?startat=pt07ch76hla10.html

You can select your reference point in the field output and history output options available in Step module. You need to activate the variables that you need for your reference point.

Dear Sheikh Mohd Iqbal S. Zainal Abidin,

you can create a geometric Set in the Assembly level where you should include the Reference Point. When you open the .odb file and reach the dialogue window where you pick the desired node from the active viewport, you are going to right click on the "Node sets" option on the left of the window (assuming that you want to obtain a node-based quantity). In the available list you should see the Node set for your Reference Point. By selecting the previously defined node set you will get the results you have selected.

Regards,

Anargyros

Dear Sheikh Mohd Iqbal S. Zainal Abidin, If I understand correctly, you must select the Element sets method in the tab: Elements/Nodes of the window: XY Data from ODB Field Output. I attached an image for your better understanding. I hope you find it useful. Best regards,

Jorge