I would like to know how can I prolong the shelf life of a coated 96 wells plate in 2-8 c in by modifications in coating step.

Yasaman Moradi @Yasaman_Moradi2

07 July 2017 1 9K Report

What are all parameters of coating antibody on a plate which should be considers?

Aamal Ghazi Mahdi Al-Saadi

Hello Yasaman,

Details about plate coating are found here:

http://www.sigmaaldrich.com/technical-documents/protocols/biology/coating-tissue-culture-plates-with-vitronectin.html

http://biolamina.com/media.ashx/instructions-bl001.pdf

Badges
Science method

More Yasaman Moradi's questions See All

Is there a relationship between the concentration of tracer (labeled Ag) and the maximum measurable concentration of analyte in a competitive ELISA?

In order to find the optimum concentration of my tracer, I replaced it in a commercial kit instead of kit's tracer, in the range of 5-150 ng/ml, but I was surprised to see the OD was similar and...

10 November 2018 6,272 1 View

How can I calculate service life of one electrical device ?

i have designed electrical device and now I should inform service life of the device.but I dont know how.

11 December 2017 3,768 0 View

Is there a functional and effective ribosme binding site for cloning two genes with one promoter in Pseudomonas aeruginosa?

I want to insert two genes in a vector and transform p.aer by this vector.I want to use RBS (ribosome bind site)in order to making the vector seq shorter.Is it possible?

02 March 2017 737 2 View

How the concentration of a labeled antigen should be optimized? Should this concentration be equal to the concentration of highest standard?

optimization of a competitive ELISA assay. I need to add labeled antigen and an unknown sample (or standard) simultaneously to the well which is pre-coated with capture antibody. labeled antigen...

01 February 2017 1,407 3 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

How do I conformally do PR spin coating on trench structure?

I did PR spin coating on trench structure. I used AZ P4620 PR and the thickness or PR is around 11um. The substrate is Si. And my trench structure depth is 141um(negative way). Even though I...

08 August 2024 2,298 0 View

Is changing the medium during the experiment overestimate the results?

I am experimenting with cancer and non-cancer cells in a 12-well plate for 4 days with a seeding density 1*10^4/well, however, I noticed that the control group growth rate slows down on D3. Should...

07 August 2024 2,283 2 View

Do I need specific antibodies to stain for a fusion protein?

I am staining some brain sections stored in cryoprotectant that express a Histone H2B- GFP fusion protein that were generated ~10 years ago. I know I need to enhance signal with an anti-GFP...

07 August 2024 5,338 2 View

Why do i have a weak plasma and no coating during rf sputtering?

I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.

07 August 2024 4,526 4 View

How to normalize and take the significance of the MTT OD values with 3 replicates for the same cell-line?

Hi, I have a question about normalizing the MTT OD values for doing the statistical analysis. So, if we have 3 different plates and we call them 3 different replicates, so, first we would...

07 August 2024 8,106 4 View

How to determine positive-stained cells in FACS? Use isotype or unstained control?

To compare positive and negative cell populations in flow cytometry, should I compare unstained cells with antibody stained cells? Or with the isotype control? Most papers show comparison with...

06 August 2024 6,728 6 View

Are there any commercially available Donkey anti-Alpaca secondary antibodies?

Are there any fluorescently labeled anti-Alpaca secondary antibodies raised in Donkey? So far I have only been able to find anti-Alpaca secondaries raised in Goat. Or is this not possible due to...

04 August 2024 4,255 1 View

Can you recommend a 96-well plate for minimal cell adherence to the wells during phagocytosis experiments?

I have been performing short phagocytosis experiments using 96-round bottom, tissue culture treated, well plates (Falcon, 353077). I culture the cells with the phagocytic cargo for 2-4hrs, wash...

04 August 2024 5,228 4 View

PBMC infection with virus?

In my study, I intend to infect PBMCs with SARS-CoV-2. After that, I will analyze NK cells by flow cytometry to see if their phenotype changes or if they show degranulation. After the infection, I...

01 August 2024 4,403 4 View