.
Hydrazine hydrate can not be used in my lab
Please find an article in the attachment.
Please find another article.
Another one.
Hi
you found in the attached file an article on the thin films of ZnS deposited by CBD
Please give details of the software
04 May 2017 2,073 0 View
i want details of the software
04 May 2017 2,598 4 View
It ll be helpful to concentrate for future projects...i want material that will be important for next decade
03 April 2017 5,321 9 View
please give theoretical analysis
03 April 2017 717 2 View
I want to get CNT/Iron Oxide thin film layer by chemical process.
09 October 2016 7,356 2 View
i want a model or theory related to this
08 September 2015 8,765 2 View
Please gives theoritical reason and an application.
01 February 2015 3,012 2 View
Please tell me the valid range for GOF and also i want to know why it varies
09 October 2014 7,998 0 View
I want chemical reaction also.....
07 August 2014 9,625 1 View
Give me the chemical reaction
07 August 2014 8,697 2 View
We use reactive sputtering process to make aluminum nitride film, and want to make c-axis aluminum nitride film on a silicon substrate, but the crystal orientation cannot be seen with...
03 March 2021 7,975 3 View
I try to check the uv-vis absorption of Indium nanoparticle. Now I am measuring in solution, can I measure it in the form of a film?
01 March 2021 930 3 View
Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.
28 February 2021 3,640 3 View
What could be the reason of moisture at the sides of Vial when I am preparing my polmyer+DMSO solution for membrane fabrication? What etiquettes I am possibly missing here?
28 February 2021 6,516 5 View
24 February 2021 2,362 5 View
Hello everyone, I'm looking for a way to delaminate copper current collector of water-based anodes in Li-ion batteries without damaging the graphite film. I tried different materials such as HNO3...
24 February 2021 3,785 3 View
As it is highly probable that pellets will have a higher degree of air gaps and voids than thin films, is it possible to pole the samples with corona poling nevertheless? Or is there the...
24 February 2021 1,349 1 View
I am trying to characterize an electrochromic system. The system uses ITO electrodes on glass, WO3 as the electrochromic film, and NiO as the ion storage layer. When I deposit NiO and WO3 and...
23 February 2021 9,592 2 View
I notice that upon washing and air-drying of my RGO/SPCE surface and characterizing again via DPV, the current response towards ferricyanide probe significantly decreases. My worry is that the...
22 February 2021 5,324 3 View
22 February 2021 9,932 11 View