For a rectangular 2D geometry
You did not mention what do you want to implement (Profile? BC changing with time? etc...)
I recommend you to go through Fluent tutorials related to UDF. There are many.
I attached an example.
Regards.
Dear Mounir Bouaifi
My M.Tech project is on
"Computational Investigations of Irradiance for Photo-bioreactor for Exploration of Algal Growth"
And I want to write a UDF for the Algal growth with respect to light and CO2
Hi Som Dutt,
First I recommend you to read “Fluent UDF Manual”, in that PDF file
1. How to write UDF?
2. How to compile or interpreted?
3. Usage of Macro’s
4. How to access flow variable?
5. Also you can add, sources terms in the form of mass, momentum and energy to your simulation.
is given.
From your flow variables, you can calculate “amount of growth (probably)” and then you can add as source term.
Good luck with your work :-)
Dear Vignesh Saravanan
thank you so much
VOF model, Eulerian-Eulerian and mixture model in ANSYS FLUENT
10 November 2018 567 0 View
This Question is just to take an overveiw of labs work and for some suggestions regarding my work.
02 March 2018 1,457 0 View
Specifically: Monod-type reaction for biomass growth calculations
01 February 2018 6,037 3 View
For the study of light and bubble formation inside the PhotoBioreactor.
01 February 2018 3,136 6 View
For the designing modeling and the simulation pupose of bioreactor.
01 February 2018 3,597 2 View
For the designing modeling and the simulation pupose
01 February 2018 4,660 2 View
01 February 2018 6,261 4 View
For the designing modeling and the simulation purpose of Bioreactor
01 February 2018 6,172 3 View
For the designing modeling and the simulation purpose of Bioreactor.
01 February 2018 1,208 1 View
Research group
05 June 2017 2,830 0 View
What should be the equation for halfway bounce back boundary condition for flow field with forcing term?
08 August 2024 7,938 1 View
I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...
08 August 2024 719 0 View
Hi everyone, If you have written or come across any papers where Generalised Linear Mixed Models are used to examine intervention (e.g., in mental health) efficacy, could you please share the...
04 August 2024 4,130 4 View
HOW CAN I WRITE A CODE TO USE THE WAVENET TRANSFORM AS A FEATURE EXTRACTION METHOD INSTEAD OF DWT IN MATLAB?
03 August 2024 7,829 0 View
I want to write a topic for my PhD thesis in hospitality (hotels), can u please suggest some variables
29 July 2024 9,058 3 View
a 15-page paper
29 July 2024 1,956 5 View
In hirshfeld surface calculation i did not find any red spot in hirshfeld surface, is it ok for research article to write?
28 July 2024 2,988 0 View
Hello. I have the geometry of a blade in CAD file (stp) and I want to prepare the blade for meshing with turboGrid. I must import this file into designModeler and then transfer to the...
27 July 2024 356 3 View
Looking for paper collaboration writers: Collaboration Model 1: 1.1 Based on the chosen topic, complete the paper writing, select an SCI or SSCI Q1 journal, submit using my QRCID, and complete...
27 July 2024 8,965 1 View
Dear Siesta Users, I installed Siesta 5.0.1 and I want to use Grimme's D3 correction. According to the 5.0.1 manual, I could use a few parameters to include the D3 correction in the...
27 July 2024 5,748 0 View