Hi,
I am new to COMSOL and need to simulate the microneedle penetrating the tissue. I have both my tissue and probe design ready in solid mechanics.
How do I add prescribed velocity to the probe and study the displacement and strain?
I suggest you follow https://www.comsol.com/video/simulating-particle-tracing-in-fluid-flow-with-the-comsol-software
https://www.comsol.com/video/simulating-bioheating-and-tissue-ablation-in-the-comsol-software
https://core.ac.uk/download/pdf/42491212.pdf
Dear Mr. Suvindran,
I think you need to use "Parametric Sweep" which you use in your "Study". Depends if this function fits in your application, I used it before to compress hyperelastic materials. In my case I specified an additional parameter for the "parametric sweep" as a function in "Parameters"
There are also other sweep options, but this one should help you out I think, depends what the goal is of your simulation.
Sincerely,
Detlef J.
I suggest you to try the moving mesh module in Comsol. You would find options for adding prescribed velocity to the needle.
- Badges
- Science topic