How to plot Luminance(cd/m2) vs Anode Voltage for an LED using Silvaco TCAD?

17 October 2022 1 5K Report

What command do I need to use to plot the L-V plot for an LED in Silvaco TCAD. I am able to plot Luminescent Power(W/um) vs Anode Voltage, or is there any relation that i can use to convert the luminescent power(Watts/um) to Luminance(cd/m2).

Qianxi Hao

Have you solved it

Badges
Science topic

Similar topics
Phytochemistry
Extracts

More Abinash Baruah's questions See All

How to form colloidal solution from nanopowders?

Hello everyone, I have prepared SnO2 nano powders using chemical co-precipitation method. Eventually, I want a colloidal solution of SnO2. Please guide me how I can convert the nanopowder to...

23 August 2023 7,622 6 View

How to fix numerous parameters for thin film deposition using DC Magnetron Sputtering?

Dear Researchers, I am trying to sputter Cu. I am facing problem to decide the values of different parameters like sputtering time, power, and pressure, such that I will obtain a desired...

07 June 2023 7,092 4 View

Why is MATLAB computation using parallel cluster on an HPC slower than my local computer?

I am trying to run a non-linear finite element MATLAB code whose basic structure is as shown below. It has an outer for-loop and inside it, there are two parfor loops. for i = 1 :...

20 March 2023 721 5 View

What is the mathematical expression for calculating the refractive index/permittivity of MXene material?

I need the numerical expression for computing the refractive index of MXene over a broad wavelength range. Thank you in advance

02 February 2023 4,882 1 View

How can we get new standard deviation while calculating mean difference (subtracting one mean from another, having different SDs)?

Greetings, Let's say I have a mean value X with SD 1.5 (i.e. X ± 1.5) and another mean Y with SD 1.3 (Y ± 1.3). If I have to subtract those mean values, how can I do it for Standard deviation?...

06 December 2022 1,416 1 View

What are the experimental methods to create a defect layer in the multilayer 1D photonic crystal structure?

I have fabricated a binary 1D photonic crystal structure. By which technique I can introduce a defect layer (air) in the middle of the structure. I want to use the defect-based structure for...

06 November 2022 2,529 2 View

Can a free-standing film (less than 1 nm) is consider as Quantum well structure ?

We have fabricated free-standing monolayer MoS2 (0.8 nm thickness). The surrounding medium(both side) are air (insulating in nature). The monolayer MoS2 has a band gap of 1.8 eV. It is a kind of...

03 November 2022 5,513 1 View

Does Invitrogen Dynabead protein G immunoprecipitation kit: Catalog number: 10007D work after thawing the kit from -20C (Accidental storage)?

Due to an accidental event in our institute and power cutoff I have stored the Dynabead protein G immunoprecipitation kit in -20C for 16-24 hours. As the kit recommends the storage should be...

29 March 2022 9,175 1 View

How does the 'crack-tip-containing-element' and 'split-element' get correctly detected by level-set in XFEM?

The attached photograph shows a crack (red colour) passing through element-a & element-b in XFEM mesh discretization. 'phi' indicates the level set (signed distance function) from the...

24 February 2022 7,649 4 View

Why does full Newton Raphson method not converge during unloading in thermo-elasto-plastic FE simulation?

I am simulating arc welding where, my initially I perform a non-linear transient thermal analysis and then I do a non-linear elasto-plastic analysis under thermal loads. During thermal analysis,...

17 September 2021 1,101 7 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

Binder for ZnO nanoparticles in graphite paste electrode?

I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?

03 August 2024 4,624 3 View

How to find a reaction is reversible or irreversible in CV? How to know the number of electrons transfer?

My screen printed electrode CV is given here. For Nerstean one electron reaction the delta E value should be close to 57 mV and ration of Ic/Ia should be close to 1. I did CV of my screen printed...

30 July 2024 4,671 3 View

How to check pH of a high strength hydrogel?

We are working on biopolymeric hydrogels. Our system is highly viscous and sticky, and the gel formed are high in strength. We are unable to use pH electrode and pH strip. Please suggest an easy...

30 July 2024 942 2 View

While doing Chronoamperometry, when the light is turned off, why the current is not decreasing sharply?

Here, I have used Ag/AgCl as reference electrode and 0.5M KOH.

29 July 2024 4,538 3 View

Why semicircle of nyquist plot is not complete?

While I am doing HER, I noticed that nyquist plots of Electrochemical Impedance Spectroscopy (EIS) is not complete. Will it affect for the Linear Sweep Voltametry (LSV) data? However, I can found...

26 July 2024 7,542 4 View

How can I calculate AlGaN/GaN HEMT Breakdown Voltage on Silvaco TCAD?

Hello, I'm newbie to TCAD. I wanna calculate Breakdown Voltage of AlGaN/GaN HEMT. But, my code shows just saturation. Could you please help me how to simulate Breakdown Voltage of my code? And...

25 July 2024 3,738 1 View

Why do these abnormal charge/discharge curves of coin cell batteries appear?

As shown in the figures, there are several abnormal charge/discharge curves.Each of them may have different problems. I am curious why these situations appeared differently?There are a lot of...

24 July 2024 6,930 1 View

How can i solve the code problem in Sentaurus TCAD?

Currently, I have created a gate-all-around process using sentaurus tcad and I am trying to measure the noise using the cmos noise code. However, an error occurred during the simulation. The error...

24 July 2024 6,352 0 View

What binder would be the best choice to modify glassy carbon electrode with a 2D Material like Graphene or MXene?

I am trying to drop cast 2D Materials on Glassy Carbon Electrode for Cyclic voltametry and EIS purpose. What would be best binders to use?

23 July 2024 5,776 2 View