23 January 2017 5 6K Report

A Qanat is a gently sloping underground channel to transport water from an aquifer or water well to surface for irrigation and drinking. The qanat technology is known to have been developed in ancient Iran. Nowadays lots of these qanats are out of service and may have been destroyed. So it's possible to flow subsurface water and wastewater through these qanats. In your opinion is it necessary to model and how can I model these qanats in the GMS, as effective factors in groundwater modelling approach?

Actually i'm modelling an aquifer using GMS 10.1 and I don't know how to model qanats which do not have discharge but they can drain wastewater easily from one point to another and affect water level. 

Thank you in advance for your cooperation. 

More Farzad Bahadori's questions See All
How to get "density" and "viscosity" for cavitation(water vapor) for cavitating Francis turbine?

Hello there I am simulating cavitation for a Francis turbine. Francis turbine is rotating with 826 rpm. I have two questions; 1- Vapor pressure for my case is 2100 Pascal, and Temperature is 25...

13 May 2024 4,403 7 View

How to avoid segmentation in Level Set Topology Optimization ( I would need to localize the variation of the level-set)?

Dear All, I am trying to converge on an optimal solution for a compliance minimization problem using a parametric RBF-based level set method. However, I have faced the following problem(s) for...

14 February 2024 9,511 0 View

How to model anchored cable bolts (passive bolts) in FLAC 2D 8.1 software?

I am investigating the impact of pretension effect around circular tunnels. How can I do my own modeling? 1- I want to excavate a tunnel. 2- I want to put a rock bolt or cable bolt in the hole 3-...

08 February 2024 7,166 1 View

What are the boundary conditions for a 2D Channel when we know pressure inlet?

Hello everyone I am working in a 2D channel where I know the inlet Pressure as a function of cosine, and out let pressure at atmospheric level. What should I use for inlet and outlet boundary...

26 November 2023 6,412 5 View

How can I have smooth boundaries in topology optimization using level-set method?

I am working on topology optimization using the parametric level set method. Regardless of the methodology, I thought it might be a generic problem in Topology optimization with which many...

05 October 2023 2,725 4 View

How to prepare a distribution map of Fritillaria genus in the world?

Fritillaria is one of the largest genera of the Liliaceae family. There are about 170 taxa of this genus all over the world. These are mostly native to the temperate regions of the Northern...

03 July 2023 5,678 0 View

Can I use convergence behavior of residuals to predict if my flow is laminar or turbulent when I use steady state simulation?

Hello all, I am trying to predict Drag coefficient of an object(and I am not interested in the vortex shedding after my object, also I cant afford LES), so I decided to use steady state...

05 April 2023 1,357 0 View

Inwieweit hat Bewegung und Sport Einfluss auf die Therapie von substanzabhängigen Suchtpatienten?

Ich untersuche die oben genannte Frage und brauche so viele Informationen wie möglich zu diesem Thema.

23 March 2023 986 1 View

laminar Flow over a sphere(laminar vs KOmegaSST simulation) in OpenFoam?

Hello all I am simulating flow over a sphere at Re = 881 where Drag coefficient must be almost Cd=0.5. I simulate it using both using laminar and Turbulent models(KOmegaSST). for laminar...

11 March 2023 9,341 3 View

How to calculate energy spectrum for a Homogenous Isotropic turbulence at specific time in a rectangular shape?

Hello all I have two questions; 1- First of all, is it possible to generate HIT inside a rectangle? If so, it is called HIT again? 2- if Nx=Nz but Ny is different, How can I calculate power...

12 January 2023 3,135 3 View

Similar questions and discussions
How can I prepare virus for a TEM or SEM imaging?

I have virus (viral hemorrhagic septicemia virus) in suspension and the experiment will not involve cells. What level of TCID50 is preferred?

11 August 2024 3,115 1 View

• What the possible Persistent Organic Pollutants and Heavy metals present in fluorspar, sediments, and water bodies around its mining area?

Approximate concentrations are require in compared with the WHO permissible limts

11 August 2024 2,723 1 View

Handling Missing Data and Building a Predictive Model with Incomplete Information ?

I am developing a predictive model for a water supply network that involves 20 influencing points. However, I only have historical data for 10 out of these 20 points. I would like to know how to...

10 August 2024 4,005 2 View

Is it possible to use the Fused Deposition Modeling (FDM) to additively manufacture interconnected porous structure generation of >100-200 micrometer?

Usually, additive manufacturing techniques like SEBM, SLS, and SLM are used for interconnected porous lattice structure generation with sizes of >100–200 micrometers. Can the Fused Deposition...

09 August 2024 7,892 0 View

Do interactions between biosphere, carbon cycle, & water cycle impact global warming & interaction between atmosphere & hydrosphere?

How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?

09 August 2024 3,291 2 View

How to define an anisotropic material with asymmetric elastic compliance/stiffness matrix in ANSYS APDL?

I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...

09 August 2024 5,048 2 View

Is it true that $\det(V(A))$ may be only $\pm 1$, depending on $n$, for the last symmetric tridiagonal matrix $A$?

One can try to generalize the Vandermonde determinant in the following direction: Let $A$ be any symmetric $n$-order square matrix. Consider its powers' diagonal elements $(A^k)_{ii}$ and...

08 August 2024 6,690 1 View

How can I apply boundary conditions in an orthotropic steel deck numerical model using ABAQUS software?

I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...

08 August 2024 719 0 View

How to prepare the nanoparticle treated fungal sample for Environmental SEM analysis?

A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.

07 August 2024 5,307 1 View

Hello Everyone ! I'm looking for a good journal to publish my manuscript with low publication cost?

I am Looking for a Science Journal with good impact factor and low publication cost to publish a review paper. Your suggestions would be appreciated.

06 August 2024 6,796 3 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close