How to model Composite in Comsol 4.3 ??

07 July 2014 1 2K Report

I have a model designed in creo 2.0. I want to model it as fiber reinforced composite for analysis .Please let me know how to model it as fiber reinforced composite in comsol 4.3..thank you

Renjie Xu

"Finite Element Modeling of Thermal Expansion in Polymer/ZrW2O8 Composites".

I think this paper will help you and you can google it.

Hope it will help you.

Badges
Science topic

More Sailendu Biswal's questions See All

Can we use same(identical) Complex Potential Function in case of plane stress and plane strain ?

In case of plane stress and plane strain , the biharmonic equation roots will be different as the Hooke's law is different for both the cases. So, I would like to ask can we use same complex...

03 April 2018 1,925 4 View

How to model interface properties for randomly distributed particle reinforced composite in Abaqus /ansys/comsol ?

I am trying to do failure analysis of randomly distributed CNT reinforced composite.Please suggest me how to incorporate the interface properties between polymer matrix and carbon nano tube in...

01 February 2015 5,188 10 View

What are the interface properties between ABS and carbon nano tube?

Interface properties between CNT and polymer affects the elastic modulus of the CNFRP.It will be great if any one can provide the interface properties between CNT and ABS polymer.Thank You

01 February 2015 8,763 1 View

What is the difference between micro, meso, and macro modeling of a composite for analysis ?

In multi scale modeling, what are the deciding factors that dictates selection of particular scale of modeling ?

07 August 2014 1,204 8 View

How can we find the results for named selection nodes in Ansys Workbench?

I 'm doing analysis on solid objects in Ansys workbench. I need to find the result for particular named nodes. I have crated a group of nodes where I need to find result using named selection, but...

04 May 2014 4,579 3 View

What is the difference between uniform & non-uniform B-spline?

Is there any change in knot vectors between uniform & nonuniform Bspline? What are the equations used to calculate Knot vectors in both of these cases?

03 April 2014 9,904 1 View

Does anyone have the MATLAB code for Barlat 1996 yield criteria?

I'm looking for the MATLAB code for Barlat 96 yield criteria for anisotropic aluminum alloy to determine the material constant and to plot yield surface. If you happen to have it, I'd be grateful...

02 March 2014 9,259 0 View

How can I thicken a surface in stl format using Matlab

I have a surface generated using photogrammetry in stl format. I want to thicken it into a solid using Matlab. I need an algorithm. If anyone has worked on such problems please suggest me how to...

02 March 2014 405 2 View

Problems about acousto-optic coupling in Comsol, how to check whether the moving mesh is correct?

I’m trying to reproduce the acousto-optic coupling simulation in the paper Frequency–angular resolving LiDAR using chip-scale acousto-optic beam steering. LNOI(lithium niobate on insulator) is...

13 August 2024 9,795 0 View

How to learn more about SPSS and its Application?

I would like to learn more about SPSS and Its application especially in regards to data analysis. Please suggest me how I can learn more about it. Thank you so much.

11 August 2024 9,101 4 View

Can I base on reverse DNA sequences to perform alignment, convert to amino acids and GenBank submission?

I have reverse sequences (AB1 format), can I base on reverse DNA sequences to perform nucleotide alignment, convert nucleotides to amino acids and deposit the sequence in GenBank database?

11 August 2024 5,138 1 View

Baseline drift in HPLC? What causes this?

Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!

11 August 2024 3,770 4 View

Text-Communication from the M1 Hand Area using BCI—and then there is Elon Musk?

Willett, Shenoy et al. (2021) have developed a brain computer interface (BCI) that used neural signal collected from the hand area of the motor cortex (area M1) of a paralyzed patient. The...

10 August 2024 7,180 0 View

Has anyone applied Python in the field of textile engineering for data analysis, automation, or smart textiles?

I'm currently exploring the application of Python in textile engineering, specifically in areas like data analysis, process automation, and the development of smart textiles. I'm interested in...

10 August 2024 7,429 2 View

How can I use the cif data obtained from rietveld refinement extracted via gsas2, for microstructural analysis using ETEX software?

09 August 2024 7,718 0 View

How are iso-frequency contours plotted?

Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...

07 August 2024 1,937 1 View

How to prepare the nanoparticle treated fungal sample for Environmental SEM analysis?

A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.

07 August 2024 5,307 1 View

How to normalize and take the significance of the MTT OD values with 3 replicates for the same cell-line?

Hi, I have a question about normalizing the MTT OD values for doing the statistical analysis. So, if we have 3 different plates and we call them 3 different replicates, so, first we would...

07 August 2024 8,106 4 View