beam is of size L=500mm, B=100mm, D=100mm, here the beam is made of steel sheet which surrounds concrete and shear connectors which are connecting concrete and steel sheet. for this model I have to do a thermal analysis and static structural analysis for pure bending under four point loading. if some one have any details please help me...... thank you in advance
@Senthil kumar kaliyavaradhan
I just need to do transient thermal analysis on this particular model and after that static structural analysis. after all I need to find pure bending of the element before and after heating.
can you help me with that....
if you want to analyze it as a beam, then you need a cross-sectional like VABS to perform a constitutive modeling to link the original 3D model with the beam model so that 3D results can be obtained with the efficiency of the beam theory. You can refer to my student's thesis Analysis of Slender Structures Using Mechanics of Structure Genome and Open Source Codes at https://cdmhub.org/resources/1099. The code developed in that work can be freely launched at https://cdmhub.org/resources/scstandard.
https://cdmhub.org/resources/scstandard
- Badges
- Science topic