Absorption by fluent. how?

Hello I want to simulate the absorption process in the fluent (liquid absorb vapour) how can I do it? please

06 July 2016 9,862 0 View

How to make the nanoparticles suspent in the fluid for the longest time ?

Dear all, I'm trying to prepare nanofluid with (acetone zinc-bromide) as a solution and (ZnO) as a nanoparticles. when I mix them all the particles sediment in one day, then I put it in a...

05 June 2016 874 4 View

How evaporation one of two fluid using ansys fluent?

hello everyone I want to simulate the evaporation for one of two fluids (evaporation water mixed with oil) pass through horizontal cylinder. The boiling point temperature for the oil is higher...

03 April 2016 8,702 3 View

In the CFD condensation modeling via fluent, why am I not getting a completely liquid phase adjacent the wall?

03 April 2016 6,982 5 View

Does anyone has tutorial Condensation simulation in fluent?

hello Please if any one has a tutorial of the condensation using fluent or CFX, I appreciate if he/she pass it to me. Thanks in advance

02 March 2016 5,884 4 View

How to make the absorption process via fluent?

01 January 1970 5,275 2 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

How can I integrate a routing protocol in a tiny device (e.g. Raspberry Pi)?

Hi Community, I'm facing the issue of integration/compiling a new routing protocol in a WSN simulator. The final goal is to successfully add, configure this routing protocol in hardware devices...

01 March 2021 9,332 6 View

How to show arrows over the streamlines in CFD-post?

I follow this to make streamlines like the photos attached below: (software- CFD post-processing) First I plot the 2D streamline over a surface "streamline 1". them I plot a vector by the...

01 March 2021 8,668 3 View

How to check the uv-vis absorption of nanoparticle by surface plasmon resonance?

I try to check the uv-vis absorption of Indium nanoparticle. Now I am measuring in solution, can I measure it in the form of a film?

01 March 2021 930 3 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

How to increase mesh quality of a cfd model in ansys fluent?

How can one improve mesh skewness, orthogonality, aspect ratio?

28 February 2021 7,730 3 View

How to improve and implement WBAN MAC and Radio modules under Castalia 3.2 ?

Hello researchers, Hello Castalia3.2 researchers I am a beginner with Castalia, I work on optimization of RFID systems used in wireless body networks. I simulated a WBAN with 10 nodes and one...

28 February 2021 400 1 View

Why initial concentration of Pb not the same as calculated one when testing using AAS?

I am currently doing research on the adsorption of heavy metal using magnetic reduce graphene oxide. I use AAS to determine the concentration of the heavy metal. I prepare the Pb solution with...

26 February 2021 9,580 4 View

How do you mesh a thin solid in Fluent?

Hello, I have used the shell function on SpaceClaim to create thin solids for the model I am studying. These are contained within an enclosure for my study. I chose this approach as it avoids the...

24 February 2021 8,856 3 View