How to imput the swirl number as user define function fluent?

More Lalmi Djemoui's questions See All

How to create an udf for a temperature as a boundary condition knowing that its evolution is sinusoidal in ansys fluent ?

UDF, boundary condition , Fluent

08 September 2018 1,925 0 View

How to add a source term in the momentum equations through UDF. in fluent ?

UDF fluent

06 July 2018 3,248 1 View

How to calculat the correlation coefficient and in fluent ?

boundary condiction

06 July 2018 5,362 4 View

How to introduce the daily variation of external solar radiation via User Defined Functions (UDFs) in fluent?

User define function in fluent

06 July 2018 7,591 0 View

Aim objective to participate in a congress

what is the main purpose of participating in a congress: to participate or publish your paper

01 January 1970 6,266 2 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

How to show arrows over the streamlines in CFD-post?

I follow this to make streamlines like the photos attached below: (software- CFD post-processing) First I plot the 2D streamline over a surface "streamline 1". them I plot a vector by the...

01 March 2021 8,668 3 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

How to increase mesh quality of a cfd model in ansys fluent?

How can one improve mesh skewness, orthogonality, aspect ratio?

28 February 2021 7,730 3 View

How do you mesh a thin solid in Fluent?

Hello, I have used the shell function on SpaceClaim to create thin solids for the model I am studying. These are contained within an enclosure for my study. I chose this approach as it avoids the...

24 February 2021 8,856 3 View

How to extract the y+ value from fluent ?

I am doing a 3D steady simulation of a wind rotor using Ansys Fluent. In order to have a y+ of 1, I created 10 inflation layers using total layer thickness method, and I started a first...

23 February 2021 2,819 3 View

Why does the sum of reaction forces not match the force component of a Free Body Cut in Abaqus?

I am using Abaqus to simulate a plate with in-plane loading. The boundary conditions allow the right edge to move up and down, the displacements on the left edge are fixed. There is no rotation...

23 February 2021 711 3 View

Kadhim Kareem

Interesting question

Dušan Regodić

My suggestion for you:

1. http://www.diva-portal.org/smash/get/diva2:8667/FULLTEXT01.pdf

2.https://www.politesi.polimi.it/bitstream/10589/48721/1/2012_04_Monticelli.pdf

3. http://www.aidic.it/cet/12/29/179.pdf

4. http://jullio.pe.kr/fluent6.1/help/html/ug/node255.htm

5. https://www.sharcnet.ca/Software/Ansys/16.2.3/en-us/help/flu_ug/flu_ug_sec_bc_fan.html

6.https://www.sharcnet.ca/Software/Fluent6/html/tg/node326.htm

7.http://www.afs.enea.it/project/neptunius/docs/fluent/html/tg/node368.htm

Good luck

Khaled Al-Farhany

The swirl number is defined as the radius-weighted ratio of axial flux of angular momentum to the axial flux of axial momentum.

SWIRL_NUMBER = FLOWRATE(radius*tangential-velocity) / FLOWRATE(radius*axial-velocity)

You can use custom field functions to obtain radius*tangential-velocity and radius*axial-velocity. Some users use a reference radius in the denominator such that: Denominator = radius_ref*FLOWRATE(axial-velocity)

Lalmi Djemoui

Thank 's