Why am i not getting solid after reacting APTES with salicylaldehyde?

The reaction of APTES with salicylaldehyde in ethanol leads to the formation of imine compound yellow solid which is mention in literature, but I am not getting yellow solid I don't know why? when...

28 February 2021 2,955 2 View

Recalcitrant seed short-mid storage method?

Dear peer scientists, Ultradry storage is not suitable for recalcitrant seeds. However, theoretically, if we can stabilize the structure of the subcellular membrane, as well as glassify the...

25 February 2021 2,442 1 View

Can a Golgi-stained dendritic spines picture processed by Image J be directly used for publication?

24 February 2021 3,348 2 View

Implementation of chance-constrained optimization problem via scenario approach?

23 February 2021 7,826 2 View

No title

23 February 2021 4,014 3 View

Build an orthogonal box in ASE?

Hello, I was wondering the best way to build an orthogonal box filled with a defined crystal structure in ASE. I know it could be easily done in LAMMPS, but I guess it is also doable in ASE. The...

21 February 2021 5,899 4 View

Does anyone have a working Guanidine Hydrochloride purification protocol for synthesized ssRNA?

I am trying to in vitro transcribe some fluorescein labeled ssRNA. And I want to purify the ssRNA from the free NTPs and the enzymes (RNA polymerase and DNase I). Due to the characteristic of the...

18 February 2021 4,392 4 View

How to find a particular aptamer complementary sequence?

I can find several papers that give me a guide for choosing a suitable aptamer sequence 1. But how to find a property aptamer sequence 2(partially complementary to sequence 1)?

09 February 2021 3,511 1 View

Do anyone have a full MATLAB code for structural topology optimization using Genetic Algorithm? Such as a cantilever beam?

Do anyone have a full MATLAB code for structural topology optimization using Genetic Algorithm? Such as a cantilever beam? Could you provide some MATLAB code to me , a beginner for GA. Thank...

03 February 2021 3,789 5 View

How to do DNA normalization based on qPCR values?

Hi Everyone: I have a question regarding to qPCR. I am trying to do RT-PCR, and I want to have equal amount of input DNA for my RT-PCR, so I normalize my DNA input based on qPCR values of a...

31 January 2021 6,977 4 View

What is the most Operating System (OS) which can be INSTALL on Tiny hard devices like Raspberry Pi (RPi) hardware ?

I'm targeting to deploy a mesh network and manually configure MANET routing protocols. I'm preparing scenarios, architectures, and hard devices needed to do that. Are there some step-by-step...

03 March 2021 1,931 5 View

How to define and get results (stresses) for certain points of a model in abaqus, using python? When the size of the model changes?

I want to do a parameter study of a aixsymmetric cylinder in Abaqus. I want to create several jobs where I get the stresses for 3 different points in my model. These points are defined. I wrote a...

01 March 2021 10,078 1 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

Joint behaviour in Abaqus is not captured well?

I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...

01 March 2021 6,661 3 View

Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS?

I need to model masonry and reinforced concrete minarets for my MSc thesis. Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS? (Or any other program for just...

01 March 2021 736 3 View

How to assign different material properties to each element in Abaqus ?

Hello, I am writing a python script to generate my model and write the input file. The problem is I have 1000 elements in my mesh and I want to assign different material properties to each...

01 March 2021 9,511 3 View

How to define tie constraint between rigid body and another part in dynamic explicit model of Abaqus?

Hi dear researchers I connected a rigid body into the part of my structure by tie constraint and then I added displacement to rigid body, in static general step every thing is fine and these two...

28 February 2021 3,442 2 View

How to modify Johnson cook equation in ABAQUS?

I wanted to add an extra parameter to the existing Johnson cook equation in the ABAQUS simulation. How to add those extra parameters. Ref: A modified Johnson-Cook material model with strain...

28 February 2021 4,841 3 View

For modelling epoxy-based matrices (in composites), which model in ABAQUS is the most suitable, Concrete damaged plasticity or Drucker-Prager model?

I am working on developing a micromechanical FE model for predicting kink-band formation in UD composites. To model matrix plasticity, which model, out of Concrete Damaged Plasticity and...

28 February 2021 5,415 1 View

How to find the right number of integration points in second order 3d finite elements?

I am familiar with finite element simulations and numerical schemes like the Gauss Legendre quadrature. I also know that the Gauss integration yields exact values for polynomials up to degree 2n-1...

27 February 2021 6,818 3 View