Does different dilution factors affect negatively on NH3 reading ?

I have a sample of treated water sample & asked to obtain ammonia conc. in sample using a machine with 5-25 ppm detection range. However, upon testing with different dilution factors, all...

27 February 2021 8,483 3 View

What are the application of Fixed points thoery in Chemistry.?

It is said that fixed point theory has lot of applications not in the field of mathematics only but also in various areas. So I am looking for applications in Chemistry only..

26 February 2021 3,533 1 View

What is the molecular size for crystal violet and reactive orange 16?

I am using methyl violet 10B and reactive orange 16 (RO16) dyes for my Ph.D. research. I'm trying to find the molecular size for both of these dyes. It is possible for me to find these dyes'...

01 February 2021 3,333 4 View

How to find the target displacement to use in displacement control pushover analysis according to ASCE 41-17?

I am performing pushover analysis in Etabs of a steel braced frame but oI do not know what value should I use for target displacement. The height of the building is 20m. I want to know what value...

29 January 2021 2,190 2 View

Can we coat the pellet with graphite spray in place of silver paste for making electrical contact to measure the thermoelectric properties?

I want to coat the pellet because without electrical contact (may be due to the high resistance of the pellet), the V-I plot is not coming in the ZEM-3 instrument. I want to measure electrical...

24 January 2021 836 2 View

What is suitable etching resist coating for polished Titanium Grade 5 surface?

Currently we start a chemical etching project. This project involved etching a polished titanium grade 5 surface part. We facing a problem where by our etch resist coating peel off during etching...

15 January 2021 1,592 3 View

No title

13 January 2021 2,487 1 View

Variant or strain, what exactly happened to the corona virus ?

The new, more contagious variant of the virus that causes COVID-19 which initially detected in the U.K. and has now been spotted in many of the country. While some have referred to this as a new...

11 January 2021 8,810 5 View

How many times can we immunize mice before hybridoma preparation?

Dear all, Recently I have been working with monoclonal antibody production and I usually Immunize mice for a total of 4 times with the last one being diluted in PBS 3days before fusion...

09 January 2021 9,320 3 View

The hospitals reported rise in ICU admissions of young COVID patients - Is the new strain of COVID to be blamed?

05 January 2021 3,141 12 View

How to define and get results (stresses) for certain points of a model in abaqus, using python? When the size of the model changes?

I want to do a parameter study of a aixsymmetric cylinder in Abaqus. I want to create several jobs where I get the stresses for 3 different points in my model. These points are defined. I wrote a...

01 March 2021 10,078 1 View

LOAD DISPLACEMENT CURVES Stiffness increasing in ANSYS non linear analysis. HOW CAN I CORRECT IT?

Hi. I am doing non linear FE analysis using a new material beam under flexural 2 point loading using ANSYS. I have defined a bilinear material model. The solution has converged. In results I am...

01 March 2021 9,911 3 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

Joint behaviour in Abaqus is not captured well?

I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...

01 March 2021 6,661 3 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS?

I need to model masonry and reinforced concrete minarets for my MSc thesis. Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS? (Or any other program for just...

01 March 2021 736 3 View

How to assign different material properties to each element in Abaqus ?

Hello, I am writing a python script to generate my model and write the input file. The problem is I have 1000 elements in my mesh and I want to assign different material properties to each...

01 March 2021 9,511 3 View

How to define tie constraint between rigid body and another part in dynamic explicit model of Abaqus?

Hi dear researchers I connected a rigid body into the part of my structure by tie constraint and then I added displacement to rigid body, in static general step every thing is fine and these two...

28 February 2021 3,442 2 View

How to modify Johnson cook equation in ABAQUS?

I wanted to add an extra parameter to the existing Johnson cook equation in the ABAQUS simulation. How to add those extra parameters. Ref: A modified Johnson-Cook material model with strain...

28 February 2021 4,841 3 View

For modelling epoxy-based matrices (in composites), which model in ABAQUS is the most suitable, Concrete damaged plasticity or Drucker-Prager model?

I am working on developing a micromechanical FE model for predicting kink-band formation in UD composites. To model matrix plasticity, which model, out of Concrete Damaged Plasticity and...

28 February 2021 5,415 1 View