Is it justified to compare the free energy change of two reactions and conclude one is more favourable than the other?

Suppose we consider the binding of a ligand L to a metal M, M+L=ML and M+2L=ML2 . We compute the Gibbs free energy change for two reaction using DFT. But can we compare this two free energies to...

12 January 2021 5,893 4 View

How can i obtain electric displacement field in Piezoelectric bonded joint using Abaqus?

Mathematically, electric displacement is a vector quantity defined as {D}=([e]{E}+{P}), where {E} is local electric field, {P} is Polarization per unit volume and [e] is the third order tensor...

20 August 2020 4,789 1 View

How to calculate van der Waals radius theoretically?

I am trying to calculate van der Waals radius for silver atoms and ions. Could anyone explain the steps required to perform accurate calculations.

03 August 2020 2,574 3 View

How to align large plasmids (20Kb+) in Mac Vector?

I was trying to align 3 plasmids each around 20Kb in Mac Vector. I used the "Align to ref." tab followed by adding the sequences and then aligned them. However only a portion of each sequence is...

03 February 2020 2,635 1 View

How to do overlap PCR?

Hi I am trying to join two linear 1.2 kb fragments with overlaps. I read a protocol which says at least 1/2 of the PCR mix has to be the equimolar concentrations of the fragment. Why is so much...

30 May 2019 9,234 2 View

Is it possible to choose a site for setting a well using only remote sensing techniques and data ?

If I have only Microwave and Optical remotely sensed data, is it possible to choose the site for availability of ground water for set a pump or well so that it will reduce the chances of fail...

05 December 2018 3,372 13 View

How to create checkpoint file in molecular dynamics simulation?

Basically I want to save coordinates and momentum of atoms after n time step so that I can restart my calculation in case of an error or exceeding wall time. My MD code is in Fortran.

19 June 2018 8,262 5 View

What are the different approaches for seperate few layer graphene from graphite?

31 August 2017 1,378 4 View

Availability of Sugarcane yellow leaf virus antibody/antiserum from any private firm?

Dear all...is there any information regarding availability of Sugarcane yellow leaf virus antibody/antiserum. previously i use to procure from AC, Diagnostics, USA but now they have discontinued...

24 January 2017 4,333 3 View

Can we solve electrochemical field equations in comsol for electrochemical cell modelling?

required for ec cell modelling

03 June 2016 7,198 2 View

Is it possible to do piezoelectric coupling in ANSYS-APDL or COMSOL between tapered substrate and rectangular piezoelectric patch?

How to do Piezoelectric coupling in ANSYS-APDL or COMSOL between tapered substrate and rectangular piezoelectric patch? Piezoelectric coupling between the rectangular substrate and rectangular...

02 March 2021 9,833 3 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

How do you mesh a thin solid in Fluent?

Hello, I have used the shell function on SpaceClaim to create thin solids for the model I am studying. These are contained within an enclosure for my study. I chose this approach as it avoids the...

24 February 2021 8,856 3 View

Why does the sum of reaction forces not match the force component of a Free Body Cut in Abaqus?

I am using Abaqus to simulate a plate with in-plane loading. The boundary conditions allow the right edge to move up and down, the displacements on the left edge are fixed. There is no rotation...

23 February 2021 711 3 View

Should I use Pressure Based Solver or a Density-Based Solver?

Dear researchers, I want to simulate a flow (air) in a wind tunnel, and I want to integrate a fluidic actuator inside it in order to control the separation of the boundary layer. At the blower...

22 February 2021 4,882 3 View

Help with assigning pressure boundary conditions in FLUENT on a large structure?

Hello, I created a very tall tower (>1000m) and applied pressure boundary conditions at the inlet (bottom) and outlet (top) that correspond to the pressure are their relative altitudes....

22 February 2021 9,972 4 View

How can I obtain Reaction Forces in ABAQUS?

I am trying to simulate a simplified version of a beam resting on 10 points using Abaqus. The solutions I want to obtain are the Reaction Forces in each resting point or area when applying a...

21 February 2021 3,075 2 View

How to implement boundary conditions in Abaqus contact problems?

Hello I am trying to simulate crawling motion of a bilayer beam using Abaqus. Kind of similar to this: https://youtu.be/os-Z3ucoFpA I am using multiphysics enabled (diffusion, deformation,...

20 February 2021 2,916 1 View

How to do buckling analysis in ansys apdl for laminated plate with PZT 5H attached?

I am doing buckling analysis of laminated plate surface bounded with two piezoelectric PZT 5H and axial compressive load is applied. I am getting an error, No ANEL table exists for material 2....

16 February 2021 510 1 View