How much inductance need for induction heating?

Mingyu Kwak @Mingyu_Kwak

21 December 2021 0 6K Report

I tried to observe induction heating by using conventional copper coil but I couldn't.

I used 12 AWG copper wire with 5 turns pancake shape coil, AC 10V, 1M Hz.

For the conductor, Al, Fe, copper were used.

How much inductance need for induction heating?

And is it possible calculate eddy current through inductance change?

Badges
Science topic

More Mingyu Kwak's questions See All

How to check the uv-vis absorption of nanoparticle by surface plasmon resonance?

I try to check the uv-vis absorption of Indium nanoparticle. Now I am measuring in solution, can I measure it in the form of a film?

01 March 2021 930 3 View

How to detect uv vis spectrum of nanoparticle under 300nm?

I try to make the indium nanoparticle and check the uv vis spectrum. I heard that In nanoparticle has surface plasmon resonance peak at 200~300nm. But most of solvent has absorption peak under...

14 February 2021 6,950 15 View

Is it possible for peeling off pedot:pss film on bare glass?

I try to fabricate free stranding pedot:pss film. I already prepare pedot:pss film by using OTS treated glass. But in many papers, they just using bare glass not OTS treated glass. I did it, but I...

05 January 2021 6,968 1 View

When synthesizing nanoparticles, what is the reason for centrifuge using ethanol?

I try to make Ga nanoparticle, using octadecene as solvent. Solvent consist with octadecene, toluene, Ga nanoparticle and centrifuge the solution mixing with ethanol. what is the reason for...

04 October 2020 1,987 4 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

Sutter electrode holder leaking after applying positive pressure. How to fix?

I am using a Sutter electrode holder for my patch clamp experiments, but I'm having trouble keeping positive pressure inside my electrode due to a leak out of the back of the holder. I have added...

02 March 2021 5,829 1 View

Can water be extracted from Olivine?

I have always been interested in geology and wondered about how unique structures of materials behave in different circumstances. I stumbled upon Olivine, the magnesium iron silicate, and heard...

28 February 2021 7,330 4 View

Can thermal cycler machines be problematic during PCR?

Hi, my question is about the heating of thermal cycler machines and I hope some of you had experienced a similar thing previously. There are two thermal cycler machines in the lab(BioRad) and for...

26 February 2021 4,777 4 View

How does charge on working electrode changes with rising potential?

During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...

25 February 2021 7,994 3 View

How to delaminate copper in water-based anodes?

Hello everyone, I'm looking for a way to delaminate copper current collector of water-based anodes in Li-ion batteries without damaging the graphite film. I tried different materials such as HNO3...

24 February 2021 3,785 3 View

Have you ever experiencing air vent trouble in fermentation process?

Dear all, My research group is currently working with a 12-litre fermenter. Somehow, if we do the fermentation for more than 20 hours, the process will be more prone to contamination. Our current...

23 February 2021 1,908 2 View

Helix antenna coupling problem?

Dealing with a helix antenna, made with flexible material and not rigid like using a PCB board or wire. At the beginning of the helix is too close to the ground plane, causing coupling. How can I...

21 February 2021 4,453 3 View

What is the detection limit of ED-XRF technique for transition metals in silicon ?

Hi everybody, please, can someone tell us if the transition metals (W, Fe, Ni, etc ...) in silicon destined for solar cell manufacturing can be detected by ED-XRF technique. Note that the...

18 February 2021 6,231 4 View

Trouble shooting with his tagged protein expression in E.Coli?

i have issues in expressing a chicken protein in BL21 cells with his tag. I do not see induction even at 18 degrees. Any suggestions

15 February 2021 8,939 3 View