I try to check the uv-vis absorption of Indium nanoparticle.
Now I am measuring in solution, can I measure it in the form of a film?
Mingyu Kwak
You no longer have nano particles in a film. There are no free, discrete, independent particles < 100 nm.
Dear Mingyu Kwak,
You can measure the indium films using a UV-Vis spectrophotometer to check the plasmonic peaks. As Alan mentioned, the size of nano particles should be less than 100nm.
Alternatively you can easily check your nanoparticles under a microscope.
Alan F Rawle
If I make the film with polymer and particle, Can't I see the surface plasmon resonance peak?
I mean does polymer effect to surface plasmon resonance?
I want to calculate the pressure applied to a balloon when it is inflated by air. Is it possible using stoney equation as set the thickness of substrate as radius of a balloon? Or is there other...
28 December 2021 2,654 1 View
I tried to observe induction heating by using conventional copper coil but I couldn't. I used 12 AWG copper wire with 5 turns pancake shape coil, AC 10V, 1M Hz. For the conductor, Al, Fe, copper...
20 December 2021 6,304 0 View
I try to make the indium nanoparticle and check the uv vis spectrum. I heard that In nanoparticle has surface plasmon resonance peak at 200~300nm. But most of solvent has absorption peak under...
14 February 2021 7,349 15 View
I try to fabricate free stranding pedot:pss film. I already prepare pedot:pss film by using OTS treated glass. But in many papers, they just using bare glass not OTS treated glass. I did it, but I...
05 January 2021 7,194 1 View
I try to make Ga nanoparticle, using octadecene as solvent. Solvent consist with octadecene, toluene, Ga nanoparticle and centrifuge the solution mixing with ethanol. what is the reason for...
04 October 2020 2,220 4 View
I am using Rhodamine6G as gain medium and silver nanoparticles as scatterers on a microscope slide and laser input 532 nm comes from above.
09 August 2024 9,894 2 View
A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.
07 August 2024 5,307 1 View
For example, I perform passivation process before electropolymerization of Py for adhesion to titanium surface. Is a similar or different procedure required for ITO? If necessary, I would be glad...
06 August 2024 3,176 0 View
Hello, Can anyone provide me with the absorption coefficient of methane gas at 7.7 um? Any reference?
06 August 2024 980 5 View
Hi, i would like to simulate an absorption process in Aspen Plus. I want to use the NRTL model und would like to add some individual Henry coefficients. Is that possible and how?
05 August 2024 2,333 2 View
I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?
03 August 2024 4,624 3 View
Hello, if you made a transwell assay where you incubate the cells with a nanoparticle-encapsulated drug and considering that in the oposite compartment you'll have both the free and encapsulte...
03 August 2024 2,730 1 View
Why is TLC not a form of partition chromatography and paper chromatography not a form of absorption chromatography?
03 August 2024 7,035 3 View
Following curve related to Co0.6Mn0.4Fe2O4 Magnetic nanoparticles with extra phase a-Fe2O3. I will appreciate to help me to interpretation this spectroscopy, especially the blue line.
31 July 2024 9,140 2 View
Dear all! Oxygen vacancies do raise negatively the Fermi level by increasing the negative charge in the semiconductor crystal structure. In the case of n-type semiconductors, I wonder if this...
30 July 2024 8,339 2 View