I am researching counter electrodes for DSSC application. How many characterization must I do? If I have characterized using EIS, must I characterize using cyclic voltametry?
Yeh, you should do CV also. Go through this review, it might help you.
http://pubs.rsc.org/en/content/articlepdf/2014/ta/c3ta13374e
Am a researcher working on Routing Protocols for underwater sensor networks. Can someone please share the MATLAB source codes of an AUV assisted routing protocol....Help me please... Thank u in...
12 November 2023 1,636 1 View
Am a researcher working on Efficient Routing Protocols for underwater sensor networks. Am using MATLAB tool. Can someone help me with the detailed procedure of writing an environment, reward...
11 April 2023 4,557 2 View
case study 1
11 March 2023 210 3 View
I would like to continue my research on underwater sensor network routing protocols. As I am new to this domain, I request someone to share the source codes of Depth based routing and Vector based...
27 October 2022 3,856 3 View
Dear peers and experts, I am currently conducting anaerobic digestion research and wonder which one of these parameters represents microbial activities better: TOC, or VS. Several references I...
09 August 2022 6,941 3 View
I'm working on S aureus resistance to vancomycin. However I'm fining it difficult to perform my dilutions
30 July 2022 8,407 3 View
I want to quantify exosomes using BCA, can i use the final extracted exosomes or should i take sample from the CM before ultracentrifugation? How much ul of extracted exosomes do I need for BCA...
25 August 2021 1,239 3 View
I isolate exosomes from condition medium according to ultracentrifugation protocols. after 3 centrifugation (10 min x300g) then (15min x2000g) then (30 min x10,000g) , medium collected and filter...
11 August 2021 767 2 View
hello, Im using the Electromagnetic Waves Beam Envelops interface in order to simulate two seperate structures: one is a waveguide inside silicon, second is just propagation inside a bulk of...
10 October 2020 6,415 2 View
Dear colleagues, Now I am working on BHJ solar cells with inverted structure. I have a case where the cathode's WF (~3.8 eV) is lower than acceptor LUMO (~3.9 eV). What would happen if the...
18 August 2020 9,573 3 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
Hi! So i attempted to understand a novel protein behavior towards heat application by analyzing its secondary structure change. I subjected the protein to a thermal denaturation analysis using...
06 August 2024 1,989 3 View
I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?
03 August 2024 4,624 3 View
My screen printed electrode CV is given here. For Nerstean one electron reaction the delta E value should be close to 57 mV and ration of Ic/Ia should be close to 1. I did CV of my screen printed...
30 July 2024 4,671 3 View
We are working on biopolymeric hydrogels. Our system is highly viscous and sticky, and the gel formed are high in strength. We are unable to use pH electrode and pH strip. Please suggest an easy...
30 July 2024 942 2 View
Here, I have used Ag/AgCl as reference electrode and 0.5M KOH.
29 July 2024 4,538 3 View
While I am doing HER, I noticed that nyquist plots of Electrochemical Impedance Spectroscopy (EIS) is not complete. Will it affect for the Linear Sweep Voltametry (LSV) data? However, I can found...
26 July 2024 7,542 4 View
As shown in the figures, there are several abnormal charge/discharge curves.Each of them may have different problems. I am curious why these situations appeared differently?There are a lot of...
24 July 2024 6,930 1 View
I am trying to drop cast 2D Materials on Glassy Carbon Electrode for Cyclic voltametry and EIS purpose. What would be best binders to use?
23 July 2024 5,776 2 View
I know that films and other low-thickness laminated products are produced using biaxial orientation, but is there something similar for sheets with a thickness of around 6 mm? Or are they...
21 July 2024 1,559 1 View