additives used were graphite , graphene and multi wall carbon nano tubes in lubricant.
Sir which would be giving the best results ... is it graphene gives better lubricity than cnt and then graphite....
The best result for coefficient of friction
This is a Miocene limestone thin section and the specimens is probably belongs to the larger benthic foraminiferal group.
05 February 2024 3,709 1 View
This is from Miocene limestone and we are thinking this is a section of larger foraminifera.
05 February 2024 9,164 1 View
ASTM 4170 indicates the usage of 9 balls in a thrust bearings and the bearing ball diameter is 7.1mm. However, is it wrong if we use a 11 nos. ball thrust bearing and 6.5mm ball diameter? other...
06 November 2023 6,013 0 View
If extracted viral RNA contains 2.5% isopropyl acetate, would it be acting as PCR inhibitor?
20 October 2020 3,229 3 View
Tribology of lithium.
09 December 2019 554 2 View
I am trying to find out a suitable technique to calculate the lipid concentration of LUVs. In between the preparation process I loose a portion of the lipid. So want to know how to calculate the...
01 May 2019 7,559 4 View
I had a mineral oil of 460cSt (containing sulphur and phosphorus), after addition of nanparticles (carbon nano tubes and graphene) the viscosity decreased significantly. literatures says that the...
16 August 2018 6,607 1 View
Two oils were tested. Mineral oil and a vegetable oil. The coefficient of friction of the vegetable was found to be lesser than mineral oil but the roughness was higher in vegetable oil.
02 November 2017 7,457 2 View
Case I : An experiment was conducted using some additives. The additives formed a protective layer on the steel surfaces which reduced the roughness and hence h/Ra increased. Case II: When the...
04 July 2016 2,013 6 View
Mechanical properties influencing coefficnet of friction.
21 June 2016 1,483 2 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 942 3 View
How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?
09 August 2024 3,291 2 View
I need to do some experiment with it in liquid form.
07 August 2024 613 3 View
Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...
06 August 2024 8,716 0 View
I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?
03 August 2024 4,624 3 View
I imagine the battery drives the graphite into a carbocation, then chloride is oxidized to donate the electron to the carbocation, but what pushes the lost electrons of chloride to be shared...
03 August 2024 5,384 0 View
I am in search of a modified Hummer's method, which can be used to synthesis graphene oxide within 6-8 hours. As I am a student it is not allowed for us to work after 5 in the laboratory. So I am...
01 August 2024 8,368 2 View
The starting material is a finely ground powder. Some particles contain more graphene than others.
30 July 2024 3,978 2 View
I am currently working on modeling FCC catalyst regeneration and have come across a point of uncertainty that I hope you can assist me with. In my previous models, I have utilized lumped kinetics...
30 July 2024 6,137 0 View