PCR inhibitor: Isopropyl acetate (2.5%)?

If extracted viral RNA contains 2.5% isopropyl acetate, would it be acting as PCR inhibitor?

20 October 2020 3,058 3 View

Which is more preferable mixed lubrication regime or boundary lubrication regime?

04 July 2016 1,862 6 View

How does Young's modulus,shear modulus,Poisson ratio of a nano wire/tube/particle influence the coefficient of friction?

Mechanical properties influencing coefficnet of friction.

21 June 2016 1,344 2 View

Can we get lower coefficient of friction with larger scar diameter in a Four Ball Test rig?

Two tests were carried out. One with a vegetable oil and the other with mineral oil. The mineral oil viscosity was almost twice than the vegetable oil. It was observed that the Coefficient of...

10 January 2016 8,250 6 View

I performed an experiment and the following were negative outputs in the response table. Why?

An L9 orthogonal DOE was performed using Minitab. The S/N in case of frictional force is negative.The response of the frictional force and rpm were negative. But in case of other output...

10 July 2015 6,731 5 View

While analyzing a pin-on-disc experiment using Taguchi analysis which type of problem has to be considered- static or dynamic?

21 March 2015 3,441 2 View

In pin on disk how are you calculating the total wear track distance?

Formula.

12 May 2014 4,071 10 View

When we add solid particles to a liquid what can we call them: emulsions or dispersions?

Addition of additives in lubricant is to be called what?

06 May 2014 6,107 9 View

What is the main reason that nano particles get agglomerated?

Nano particles such as copper oxide, zinc oxide and carbon nano tubes.

23 March 2014 9,249 40 View

What is the reduced radius when we use flat faced cylindrical pins for a pin-on-disk experiment?

In hertzian models we have models for spherical -spherical and spherical-flat, but flat-flat surface is not shown.

13 December 2013 7,749 4 View

error in running a model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

error in modelling model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

MGL tools

20 June 2021 0 0 View

How climate change will influences human and animal behavioral change?

The role of climate change influencing the human behavior as well as economics interest

01 June 2021 0 0 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

i have some problem with chtMultiRegionSimpleFoam

--> FOAM FATAL ERROR: Maximum number of iterations exceeded From function Foam::scalar Foam::species::thermo::T(Foam::scalar, Foam::scalar, Foam::scalar, Foam::scalar (Foam::species::thermo::*)(Foam::scalar, Foam::scalar) const, Foam::scalar (Foam::species::thermo::*)(Foam::scalar, Foam::scalar) const, Foam::scalar (Foam::species::thermo::*)(Foam::scalar) const) const [with Thermo = Foam::hConstThermo >; Type = Foam::sensibleEnthalpy; Foam::scalar = double; Foam::species::thermo = Foam::species::thermo >, Foam::sensibleEnthalpy>] in file /home/ubuntu/OpenFOAM/OpenFOAM-4.1/src/thermophysicalModels/specie/lnInclude/thermoI.H at line 66. FOAM aborting #0 Foam::error::printStack(Foam::Ostream&) at ??:? #1 Foam::error::abort() at ??:? #2 Foam::heRhoThermo >, Foam::sensibleEnthalpy> > > >::calculate() at ??:? #3 Foam::heRhoThermo >, Foam::sensibleEnthalpy> > > >::correct() at ??:? #4 ? at ??:? #5 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6" #6 ? at ??:?

24 March 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10?

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10? Since, the growth curve from day 2 to 10 won't be like the "Logistic curve" it might not follow logistic...

03 March 2021 1,401 3 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

Resistor definition in Piezoelectric bimorph with ANSYS workbench

Hello, good day! I am trying to simulate similar bimorph piezoelectric harvester with below commands. However, the output power doesn't change with resistor value. Please help to find the reason. ET,10,CIRCU94,0 !SET UP RESISTOR R,1,100000 !RESISTANCE VALUE TYPE,10 !SET ELEMENT TYPE E,1,2 !CREATE RESISTOR BETWEEN NODES 1 AND 2 Thanks in advance Regards,

02 March 2021 0 0 View