How do I model an absorber design in aspen plus to achieve 90% CO2 removal efficiency using K2CO3 as a solvent ?

Julius Akambisa @Julius-Akambisa

19 March 2024 0 10K Report

Specify absorber conditions and specifications and if possible flow rates of both the feed gas and solvent.

Badges
Science topic

More Julius Akambisa's questions See All

In an ammonia plant, how do I increase the amount of CO2 absorbed by MEA in the CO2 absorber design in aspen plus?

plant design simulation.

18 March 2024 7,411 1 View

Biomechanical Hand Force calculation?

For my research work, I want to find the Biomechanical hand force calculation for pulling and pushing of hand lever; kindly suggest similar research articles.

16 January 2024 1,527 2 View

Eviews ARDL shortrun coefficients with 0 lag variables?

I'm currently facing an issue in my ARDL estimation, the model has decided to use 0 lags for one of the variables, but it is not showing the short-run coefficient. Instead this is shown: Variable...

01 January 2024 3,248 3 View

Dear Scholars, please what research design is best when assessing the acceptance of HPV vaccine?

A description of the readiness for the acceptance of PHV vaccine would be necessary in this world of preventive medicine.

08 November 2023 4,545 4 View

What is fibonacci sequence and what does it do in the modern world?

I'm learning Fibonacci Sequence in my University and I want to know how is it used for modern day technologies and businesses.

14 August 2023 2,130 3 View

What is the most used programming language?

I'm a freshmen and learning Information Technology on Philippines. I've heard that most developers uses Python. But others use JavaScript. I don't know where to start but they are reliable and...

02 August 2023 4,546 7 View

What is the impact of Covid on teachers performance?

I am conducting qualitative research on teachers' perceptions about the impact of covid-19 pandemic on their performance. How do draft the survey questionnaires to collect the data. I need help...

23 April 2023 6,249 2 View

Impact of covid-19 pandemic on teachers performance?

I am doing qualitative studies; can anyone help me with how to draft a questionnaire to collect information about the impact of covid-19 on teachers' performance.

23 April 2023 6,238 3 View

What is the format for a research proposal and how do I integrate other research into my introduction for the proposal?

I want to know how you write a research proposal and particularly it’s introduction because it seems I am not allowed to write an entire introduction with only my ideas.

20 March 2023 2,602 2 View

I'm having a thesis proposal and I need research titles about construction materials?

Hi, Im julius ortiz from Adamson university and I need some research ideas for construction materials and sustainability. Thank you in advance for your answers

04 February 2023 3,753 5 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

Do interactions between biosphere, carbon cycle, & water cycle impact global warming & interaction between atmosphere & hydrosphere?

How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?

09 August 2024 3,291 2 View

GC-MS retention index prediticon?

Hello experts, Does anyone know any free software about retention index prediction ?

08 August 2024 7,403 2 View

What is the solvent for 8YSZ nano material?

I need to do some experiment with it in liquid form.

07 August 2024 613 3 View

AUX gas reading problem on QE with full MS and PRM method in one run?

Dear QE-users, In the method where full MS positive mode and PRM mode are used, we always get an incorrect auxiliary gas reading (41 instead of 25). This only happens in this method; other...

06 August 2024 4,953 0 View

Aspen Plus Simulation?

Greetings When one is to perform Simulation or modelling of Pyrolysis of Biomass Waste materials using Aspen Plus software, and one has both the macromolecules breakdown (Cellulose, Lignin and...

06 August 2024 5,023 1 View

Who of all of you will help TPEOM to re-originate the Earths atmosphere to it original 5 atmospheric elements/gases?

Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...

06 August 2024 8,716 0 View

Absorption coefficient of methane?

Hello, Can anyone provide me with the absorption coefficient of methane gas at 7.7 um? Any reference?

06 August 2024 980 5 View

How can I improve the quality of lamb milk replacer for machine feeding?

Hello everyone, I am researching ways to enhance the quality of lamb milk replacer for machine feeding. I would appreciate any insights or recommendations on the following: Manual vs. Machine...

06 August 2024 6,227 2 View