How can I coat silica nano/micro particles with a thick gold layer?

More Sven Daboss's questions See All

What does it mean when the total indirect effect of 2 model with 2 mediators is significant, while both indirect effects are non-significant?

I have received the following output based on my research, which looks at a parallel mediation model with 2 mediators. There is a significant total indirect effect, but both the individual...

17 December 2023 3,658 2 View

Can UAV aerial photogrammetric mapping without GCPs and RTK/PPK cause wrong or inaccurate geometric information?

If you have an area of several 25's of acres (several 100,000 m²) and your only source of GNSS Information is that of the drone, can there be distortion of the 3D Model / orthomosaic that are so...

28 July 2023 5,345 4 View

What is the best way to obtain ultra/super/mega pure water for PCR?

Hei everyone, I ll start here a discussion for which I can't find any answer online. We are facing an issue with the water that we use in PCR and qPCR. The problem is that when we use 16S...

27 June 2023 747 7 View

Why was the term "superficial cervical ansa" removed from anatomical terminology?

Is there a special reason, why the term "superficial cervical ansa" (Ansa cervicalis superficialis) was removed from official anatomical terminology?

04 June 2023 8,367 4 View

Is there a Programm/Plugin for automated quantification of PC12 differentiation?

I want to automate the measuring of neurite outgrowth in PC12 cells. Is there any programm or fiji plugin that can measure cellbody length ,neurite length and number of neurites in a unstained cells ?

01 June 2023 7,145 3 View

Can I exclude RNA-Seq samples based on low intragroup correlation?

I have RNA-Seq samples from an experiment in which I infected epithelial cells with bacteria. The experiment was repeated identically 3 times and then once more with slightly altered parameters...

09 May 2023 965 1 View

Geltrex vs. Matrigel stem cell differentiation?

Hi everyone, I have a question regarding Geltrex vs. Matrigel in the differentiation of iPS cells to cardiomyocyte-like cells. So far we have always used Matrigel and obtained high yields of...

10 February 2022 7,997 0 View

[UTAUT2/SEM] Is it better not to covary exogenous constructs in a structural model?

Dear community, When drawing a structural model, I am highly dissatisfied with the final significance values. I obtain only one significant predictor for my dependent variable. If I remove the...

17 November 2021 2,813 7 View

Data for gas radiation coefficients for OTM calculated temperature and exhaust gas calculation?

I am searching for gas radiation coefficients, which I intend to take into account with the optical thin model for the calculation of temperatures and exhaust gases from a combustion process....

11 April 2021 9,278 1 View

How do you start building a data set for machine learning?

-Required are DEM/DTM satellite data from mountain ranges without glaciers. For example SRTM 30m. -The data has 3 parameters only. X, Y and Elevation. There is no need for georeference or...

22 January 2021 4,447 6 View

Which type of compound does lamda max of 218 indicate in a uv-vis spectrum of a partially purified compound through column and TLC?

A crude extract of fungal culture using EtOH was subjected to column and TLC and partially purified compound was obtained. UV vis spectrum of the compound/s has max absorbance at 218nm. The...

11 August 2024 9,801 2 View

How can I measure the thickness of thin film by Uv-Vis?

06 August 2024 7,810 3 View

Nano Orange protein quant on the Quantus fluorometer?

Is anyone here using the Thermo Fisher Nano Orange kit for protein quantification, and detecting the fluorescent signal on the Promega Quantus? We are struggling to make sense of the standard...

05 August 2024 8,946 3 View

Why is TLC not a form of partition chromatography?

Why is TLC not a form of partition chromatography and paper chromatography not a form of absorption chromatography?

03 August 2024 7,035 3 View

Is there a good freeware software for photodocumentation of TLC?

I need something like Camag's VisionCat software for photodocumentation of TLCs. Could you recommend something?

31 July 2024 8,415 1 View

How to build my own lab made four point probe set up?

Hello, I'm trying to measure the conductivity of semiconductor films but since I don't have a commercial four point probe set up I would like to build one on my own in my lab. I have generators,...

30 July 2024 906 2 View

How gold procurement?

Please note it

29 July 2024 4,920 3 View

How gold procurement?

https://www.cleanteqwater.com/resources/case-studies/gold-mine-australia/

29 July 2024 5,161 1 View

Does anybody know why my chitosan/pva/gelatin hydrogel dissolve in PBS?

My final research is about making chitosan/pva hydrogel for wound healing using gelatin as crosslinker. Last month, i made the thin film hydrogel and it turn well. It was okay. Last week, i make...

28 July 2024 2,794 6 View

Is it possible to manufacture polypropylene sheets using a biaxial process?

I know that films and other low-thickness laminated products are produced using biaxial orientation, but is there something similar for sheets with a thickness of around 6 mm? Or are they...

21 July 2024 1,559 1 View

Mohammad Kooti

Have you examined higher concentration of gold precursor?One expect thiker layer of gold will form.

Phil Denby

You could use a TEM grid coater which often have gold targets in them (for sputtering), and agitate the beads during deposition to ensure an even coating.

Tomáš Halenkovič

Dear Sven,

you can easily achieve the coating of 60 nm thin layer of continuous film of gold by e-beam evaporation.

Good luck.

TH.