How can I apply a thermo-mechanical load in hypermesh?

More Aniket Suryawanshi's questions See All

I am trying the synthesis of graphene oxide by using modified hummer's method and the color of my product was white silver so is it graphene oxide?

i have tried modified hummer's method for the synthesis of graphene oxide by adding Graphite powder and NaNO3 in H2SO4 . In this mix KMnO4 was added and diluted with water . this mix was heated...

13 January 2021 9,423 4 View

Is direct contact of liquid nitrogen to tissue/cells an issue?

I have un-replaceable tissues to process for several experimentation such as MS/ WB/ IHC etc. However, I suspect the direct contact of liquid nitrogen to my samples for the duration of few...

18 October 2020 9,375 3 View

Can I get MATLAB code for vibrational analysis of composite plate?

Iam working on vibrational analysis of laminated composite plate using MATLAB.

28 October 2018 7,641 3 View

How we can determine individual sum of squares for independent variables (factors) in the central composite design?

I am trying to solve central composite design ANOVA table manually. It has total 30 number of runs which includes 16 factorial runs,8 axial runs and 6 center runs. so, far using regression method...

23 April 2018 2,103 1 View

Why carcinoma cell lines (e.g. HepG2, Caco-2, RAW) are used in invitro cytotoxicity experiments?

HepG2 is considered as a model system for various cytotoxicity experiments according to many studies. Won't it produce wrong results if carcinoma cells have been used for such studies as such...

21 August 2017 5,310 7 View

What is the best place to find high power LEDs for GFP illumination?

I am looking for a high power LED with a central wavelength of around 488 nm. I know Thorlabs sells one at 490 nm that supplies 216 mW of optical power at 488 nm. However, I need at least 1 W at...

01 June 2017 4,234 3 View

Why xrd data of powder materials do not have stable baseline throughout 2theta range(10-90) . Baseline shifts from top to down as angle increases?

why xrd data of powder materials do not have stable baseline throughout 2theta range(10-90) . Baseline shifts from top to down as angle increases?

18 April 2017 4,844 4 View

Is there any standard criterion to select optimum number of sequence candidates for establishing a phylogeny tree in bacteria using MEGA?

for example, in case of 16s rRNA nBLAST results, I have almost 80 similar sequences with % similarity ranging from 99% and going down till 94% ?

16 March 2017 4,772 2 View

Nusselt Number corelation for hot liquid flow through inner annulus of pipe in case of Laminar flow.

I encountered a problem in my project work on heat exchangers where to find heat transfer coefficients on the defined conditions the Reynolds number came to be 1753.8 while the Prandtl number is...

08 March 2017 4,652 3 View

Can a substitution mutation in an exon result in splice site changes?

I have found a novel mutation in clotting factor 2 gene in an exon (midway through the exon), however, on checking with mutation tester it is showing that the mutation may result in splice site...

01 March 2017 8,737 3 View

Polymer composites suddenly solidifies?

I am making polymer composite by solvent mixing method. When I am trying to add filler solution in polymer solution it quickly get solidified. How to make them then uinform? It doesn't give time...

03 March 2021 7,540 4 View

Waters 2707 HPLC autosampler problem?

I am using a 2707 waters HPLC device. When I try to inject a sample, it says missing plate or rack. I changed the needle and calibrated its position but I still get the same problem. I even get...

02 March 2021 1,408 1 View

Should we change media after1st 6hrs after plating HUVEC bought from INVITROGEN?it's not recomended by invitrogen.Will DMSO present in stock matter?

We have HUVEC bought from Invitrogen. Cat no -C-003-5c. while first plating the cells we have bought the protocol suggests not to centrifuge the cell with media to remove the DMSO. Should we...

02 March 2021 3,713 2 View

How to normalise data on OPM package from R Studio ?

Good afternoon, I recently used OmniLog from BIOLOG for my experimentations : I tested the metabolism of different strains on 2 types of plates. I have 16 strains of 3 different groups...

02 March 2021 3,584 1 View

How to define and get results (stresses) for certain points of a model in abaqus, using python? When the size of the model changes?

I want to do a parameter study of a aixsymmetric cylinder in Abaqus. I want to create several jobs where I get the stresses for 3 different points in my model. These points are defined. I wrote a...

01 March 2021 10,078 1 View

LOAD DISPLACEMENT CURVES Stiffness increasing in ANSYS non linear analysis. HOW CAN I CORRECT IT?

Hi. I am doing non linear FE analysis using a new material beam under flexural 2 point loading using ANSYS. I have defined a bilinear material model. The solution has converged. In results I am...

01 March 2021 9,911 3 View

Distribution of particles in metal matrix?

How would define the "good" and "poor" distribution of particles within the matrix. Is there a quantitative solution to assess the distribution of the particles, which then having denotation of...

28 February 2021 7,397 8 View

Benefits of the 24 welled plate?

We have always used the 96 welled plate, the 48 welled plate but apparently there is much evidence on the 24 welled plate and above all its benefits.It states it is the same you would use on ELISA...

28 February 2021 1,149 1 View

Can bacterial suspension be pipetted directly onto petri dish and agar poured onto it?

Hi, recently I encountered a protocol for plating which was not the usual method I have been practicing (pour LB agar onto plate, allow it to solidify, pipette bacterial suspension onto plate,...

28 February 2021 7,292 3 View

How relevant is Mini slump cone?

for all the rheology researchers, my question is, how relevant is a mini slump cone (smaller than a standard 50 cent rheometer). currently based on testing, the thickness of slumped material is...

26 February 2021 3,668 1 View