I am trying to analyze nanofluids numerically using mixture and Eulerian model using Ansys Fluent 14. Can you please render assistance on how to simulate nanofluid flow using these models?
here i enclose a thesis in which the problem are similar as your problem i'e nano fluid so please go through that and i am sure you will be able to get the details which you are seeking as well as you will able to know how to deal with nano fluid simulation.
Dear Shrish Shukla, thanks a lot for your prompt reply but the thesis is not complete. Please could you send me a complete thesis.
As I dont have authority to share it directly over here that's the reason i was not send full thesis so i suggest you to write an email to the corresponding author of that thesis and i am sure you will get it.
Dear mohamed to find an email you have to go at that particular university site and then find that adviser which associate with that study and then you ill find an email over the university site then mail on it this is the way to do it.
I did what you have advised and got all e-mails and sent to them but no responce. It was from one year.
Hard luck ! So now i would like to suggesting you that try this tutorial this will help you and increase your understanding with multiphase model and simultaneous searching for latest literature.
I am using mixture model for nanofluid flow where i am confuse that at inlet velocity is calculated weather from mixture properties or base fluid properties.
- Badges
- Science topic