Hello dears. could any one help in gating ABAQUS/standard: User's Manual?

More Muzey Desta's questions See All

Could any one help me with mechanical properties of CFRP(carbon fiber reinforced polymers)?

I am modeling CFRP laminated a concrete column in Abaqus And I need Elastic and plastic properties of CFRP

09 February 2021 4,930 5 View

Could any one help me with ABAQUS tutorials on fiber reinforced polymer concrete columns please?

I am modeling Carbon Fiber Reinforced polymer wrapped concrete column in Abaqus, but I have faced so many difficulties especially in the Model< Interaction and Constraint module. SO could you...

26 January 2021 6,795 4 View

Abaqus installation error?

at the end step of Abaqus 2016 v6.14-2 installation, the product verification result show me this Abaqus Product Install Verification... Abaqus/Standard parametric studies:...

10 November 2020 4,332 3 View

Do Editors of All High Impact Open Access Journals Treat Submissions from LIC Fairly?

Many Open Access journals put the policy of waiving Article Processing Charges for authors from low income countries (LIC). But, in some cases, two things often happen. (1) The review of...

31 August 2020 1,694 14 View

Is it commendable or possible to computing and describing the prevalence rate of an outcome interest (mainly the cases) in case control study?

Is it commendable or possible to computing and describing the prevalence rate of an outcome interest (mainly the cases) in case control study? I hope the answer whould be yes. However, I am...

13 October 2019 9,289 3 View

Should Authors Cite Research or Review Papers?

Our review paper in Biofilm received more that 30 citations in about one year. The paper has more than 110 references. It is obvious that the authors of the 30+ articles have opted to cite a...

01 January 1970 9,552 2 View

How to define and get results (stresses) for certain points of a model in abaqus, using python? When the size of the model changes?

I want to do a parameter study of a aixsymmetric cylinder in Abaqus. I want to create several jobs where I get the stresses for 3 different points in my model. These points are defined. I wrote a...

01 March 2021 10,078 1 View

Joint behaviour in Abaqus is not captured well?

I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...

01 March 2021 6,661 3 View

Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS?

I need to model masonry and reinforced concrete minarets for my MSc thesis. Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS? (Or any other program for just...

01 March 2021 736 3 View

How to assign different material properties to each element in Abaqus ?

Hello, I am writing a python script to generate my model and write the input file. The problem is I have 1000 elements in my mesh and I want to assign different material properties to each...

01 March 2021 9,511 3 View

How to define tie constraint between rigid body and another part in dynamic explicit model of Abaqus?

Hi dear researchers I connected a rigid body into the part of my structure by tie constraint and then I added displacement to rigid body, in static general step every thing is fine and these two...

28 February 2021 3,442 2 View

How to modify Johnson cook equation in ABAQUS?

I wanted to add an extra parameter to the existing Johnson cook equation in the ABAQUS simulation. How to add those extra parameters. Ref: A modified Johnson-Cook material model with strain...

28 February 2021 4,841 3 View

For modelling epoxy-based matrices (in composites), which model in ABAQUS is the most suitable, Concrete damaged plasticity or Drucker-Prager model?

I am working on developing a micromechanical FE model for predicting kink-band formation in UD composites. To model matrix plasticity, which model, out of Concrete Damaged Plasticity and...

28 February 2021 5,415 1 View

How to find the right number of integration points in second order 3d finite elements?

I am familiar with finite element simulations and numerical schemes like the Gauss Legendre quadrature. I also know that the Gauss integration yields exact values for polynomials up to degree 2n-1...

27 February 2021 6,818 3 View

How can we use a hybrid element in Abaqus Dynamic/Explicit for impressible materials?

Hi, all! How can we use a hybrid element in Abaqus Dynamic/Explicit for impressible materials? I have not find the choice for explicit element in Abaqus CAE. I am wondering whether it is possible...

25 February 2021 9,936 2 View

Is it possible to do optimization for a submodel in Abaqus?

I'm trying to run an optimization in Abaqus for a submodel with no luck, jobs are not being create for submission. Is this even possible? or is Abaqus limited to do Opt. for the model itself...

24 February 2021 4,908 5 View

Saswath Ghosh

Just try a google search. Please find this link -http://130.149.89.49:2080/v6.11/pdf_books/CAE.pdf. It may help.

Assogba Ogoubi Cyriaque

Here is the Abaqus-CAE User Manual 6.12. I hope it will help you !

Khaled Megahed

http://dsk-016-1.fsid.cvut.cz:2080/v6.12/pdf_books/ANALYSIS_2.pdf

http://130.149.89.49:2080/v6.14/books/usb/default.htm