Does exfoliated graphite oxide mean graphene oxide?

More Ayesha Saleem's questions See All

Is ytterbium oxide fluorescent? what is its excitation/emission wavelength?

I want to know the excitation/emission wavelength of ytterbium oxide?

01 February 2019 967 1 View

When graphene oxide is doped with Nitrogen, which atom will be replaced by Nitrogen: Carbon or Oxygen?

In N doped graphene Carbon is replaced by N in the graphitic structure. If it is same in case of N doped Graphene oxide then why oxygen containing functional groups are reduced as indicated by...

07 August 2018 759 3 View

Does excitation wavelength of Rhodamine B dye depend on concentration of dye in solution?

I found excitation wavelength to be at 256 nm at a concentration of 0.5 mg/ml and 554 nm at a concentration of 0.0001 mg/ml.

05 June 2018 8,416 7 View

Do TMB and Graphene oxide give any colour together?

I added TMB to GO particles before adding hydrogen peroxide for testing peroxidase like activity, it gives colour even in the absence of hydrogen peroxide.Do TMB and GO have any kind of chemical...

03 April 2018 9,696 4 View

I have preapared a solution of TMB Hydrogen peroxide and Graphene oxide it is not showing any colour.Why?

The literature reveals that this solution should have blue colour as H2O2 oxidizes TMB. I dont know what went wrong why there is no colour? what can be the possible reasons?

02 March 2018 9,566 1 View

I prepared graphene oxide and dried it but later when I used it got moist immediately.i dried it again but later when used it was moist again. why ?

I have prepared GO before but it was dry each time I used it, but this time it is getting moist again and again. whats wrong?

02 March 2018 7,523 3 View

What is the bulk energy of graphene oxide?

I want to find the radius of graphene oxide that i have prepared, for that i need to know the bulk energy.

31 December 2017 9,133 4 View

If as prepared graphene oxide is excited at shorter wavelength in Raman spectroscopy, what can we infer about its energy states and hence its purity?

I prepared graphene oxide and it showed results at short wavelength of 457 nm but other students got results at 514 nm. so i want to know about the enrgy states and quality of my sample?

10 November 2017 1,537 6 View

What are the values of Raman peaks of graphene and graphene oxide?

how can i differentiate the Raman peaks of graphene and graphene oxide? they appear to be at almost same wavenumber?

10 November 2017 8,050 3 View

Can zinc sulfide be used for doping sulfur into graphene oxide?

People have used sodium sulfide for doping sulfur in graphene oxide but if Na2S is not available can we use zinc sulfide in place? or which chemical should be used instead?

10 November 2017 6,530 4 View

Does the pressure(-600 mmHg) affects pH?

When I conducted the degassing experiment using decompression under anaerobic condition(and I used ferrous based chelating agent), the oxidized ferric were observerd. So, could you tell me the...

03 March 2021 4,892 5 View

What is involved in morphological changes of SEM images of a substance?

In the sem analysis of CaCO3 nanaoparticles, the morphology images showed spherical shaped particles but the proposed morphology for these type of nanoparticles is trigonal. I prepared the...

01 March 2021 1,960 4 View

What are the new 2D nanomaterials were used for Silver nanoparticles stabilization?

In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...

01 March 2021 2,207 3 View

How does charge on working electrode changes with rising potential?

During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...

25 February 2021 7,994 3 View

How to increase solubility of Poly acrylic acid in Dioxane solvent?

I am working with Polyacrylic acid (100.000Da) and instead of water, I need to use another solvent (dioxane) to dissolve PAA. However, because of the high molecular weight, it's quite hard to...

25 February 2021 2,225 5 View

How to delaminate copper in water-based anodes?

Hello everyone, I'm looking for a way to delaminate copper current collector of water-based anodes in Li-ion batteries without damaging the graphite film. I tried different materials such as HNO3...

24 February 2021 3,785 3 View

Thermal reduction of graphene oxide.?

I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...

23 February 2021 4,155 4 View

What kind of steel moulds are used for hot pressing metal powders?

My main concern is that the metal powders should not weld to the mold surface and I should easily be able to eject out the pressed samples. I am looking for alternative for graphite moulds. The...

22 February 2021 2,965 4 View

Is there an ideal incubation time of RGO-modified SPCE before subsequent use, i.e., electrochemical characterization or further modification?

I notice that upon washing and air-drying of my RGO/SPCE surface and characterizing again via DPV, the current response towards ferricyanide probe significantly decreases. My worry is that the...

22 February 2021 5,324 3 View

Color of spiro-ometad film?

What does the color of a spiro-ometad film indicate? I got purple, green, red, even black color of the spiro film. Is there anything we can get from the preliminary color analysis(e.g. oxidation...

21 February 2021 1,831 4 View

Raul D. Rodriguez Popular answer

exfoliated graphite oxide can have flakes with a large distribution of thicknesses. While graphene oxide generally means the single-layer counterpart of the multilayer graphite oxide.

Chandra Bhal Singh

Do the XRD and Raman , only then it can be conclude.

I am attaching an image for your reference .

Raul D. Rodriguez

Ayesha Saleem

Thank you for your reply.