10 February 2024 2 6K Report

Dear Madam/Sir

I need a new complete reference about the effect of air pollution on plants/agricultural plants.

I would be very appreciate if you share the reference with me.

Thank you for your time and help.

Regards,

Soheila Rezaitabar

More Soheila Rezaitabar's questions See All
How can I get rid of much amount of solvent which is needed for the reaction to make film by film applicator?

Indeed, I want to make a very thin film (50 microns) of PU on the steel surface as a coat. for the reaction, much amount of CHCl3 is needed to dissolve one of the reagents to participate in the...

12 October 2020 748 3 View

Does anyone know any reviewer in the field of internal marketing and service innovation ?

I am going to submit my paper in the EI journal and need to introduce four International Experts as a reviewer in the field of marketing. I will appreciate any suggestions. Thank you .

25 February 2020 4,059 7 View

How to remove color of this sample?

Dear Madam/Sirs I have a unknown sample to measure NO2-, PO4 3-, F and NH3. The color was not removed by carbon active and filtration. But when we add AlNO3 the sample color sediment. Do you...

15 January 2020 5,668 3 View

Could you please help us about Atomic absorption PG instrument 500?

We have an AA PG 500 with many problems: 1. The acetylene-air flame is not stable and it turn off after some minutes. 2. The acetylene-nitrous oxide flame is not stable and it turn off after some...

19 October 2019 7,948 2 View

Are there any free online English Language Editing services?

Dear colleagues; Does anyone know a website offering free online English language editing services for scientific manuscripts to be ready for publication? Kind Regards,

21 March 2017 8,832 11 View

Does anyone know what is the transfection efficiency of MCF7 with turbofect reagent?

have seeded 110000 cells in a 24 well plate and transfect cells with 1 migrogram plasmid + 2.5 microlitre of Turbofect. The GFP flourescent as wells as normal picture after 48 hour is attached...

04 September 2015 6,569 6 View

For subculture of MCF7, Is there any need to count the cells after centrifugation to get the cell density for seeding the cells into the new flask?

I haven't draw the growth curve to know the doubling time.

10 July 2015 5,455 3 View

Can H&E staining be used on in-vitro samples?

I am looking for a staining method to detect apoptotic cells vs. necrotics using bright-field microscope (in fact for an easy, quick, and cheap assay!). I know H&E is used for tissue, I would...

21 April 2015 1,655 15 View

Collaborating in writing and publishing a research review paper

I have written a review paper entitled " Role of Internal Marketing in Creating Successful Intercultural Service Encounters: A Literature Review " and got some advice from one of the editor and...

01 January 1970 3,444 4 View

Similar questions and discussions
Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

Is Journal of Agricultural Research a predator?

it is published by Juniper

28 February 2021 354 4 View

LEDs on Vis Light photo degradation of MB water sol via N doped TiO2 in a mini flume?

Good day to all, I have no experience with light emitting diodes. I am building a glass mini flume to demonstrate the photo degradation of Methylene Blue in water running over self cleaning...

26 February 2021 4,026 5 View

Why do the air flow results vary totally when adding scalar in CFD ?

Dear All, We are using Autodesk cfd to calculate the air flow in a single sided naturally ventilated room, where air flow depends only on buoyancy due to temperature difference between inside and...

25 February 2021 9,602 4 View

Is is possible to pole with corona poling pellets of the sample material instead of thin films?

As it is highly probable that pellets will have a higher degree of air gaps and voids than thin films, is it possible to pole the samples with corona poling nevertheless? Or is there the...

24 February 2021 1,349 1 View

To date, according to health authorities, 30% of the population's diseases are initiated by drinking water pollution. Do you know this problem?

The main studies are as follows: * regular and timely receipt of information about the state of the environment using automated systems (stationary and mobile); * operational analysis of the...

23 February 2021 912 5 View

Have you ever experiencing air vent trouble in fermentation process?

Dear all, My research group is currently working with a 12-litre fermenter. Somehow, if we do the fermentation for more than 20 hours, the process will be more prone to contamination. Our current...

23 February 2021 1,908 2 View

Help with assigning pressure boundary conditions in FLUENT on a large structure?

Hello, I created a very tall tower (>1000m) and applied pressure boundary conditions at the inlet (bottom) and outlet (top) that correspond to the pressure are their relative altitudes....

22 February 2021 9,972 4 View

What type of pressure sensor are usually used in microfluidics?

My team is designing a dual channel microfluidic chip that runs air and water. I think we've decided on the NE1000 syringe pump for it's versatility and feedback control. We will be ordering the...

18 February 2021 9,928 2 View

Not able to charge-discharge Li-ion coin cell at higher C rate ?

I am working on cathode material. I have made different Li-ion coin cell against Li metal using commercial available cathode materials such as LCO,LMO, LFP and NMC and also with the lab...

18 February 2021 1,450 3 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close