Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

How to calculate the annealing temperature of a primer pair?

I have to amplify a gene and my primers just reached. The Tm for Forward primer is 64.2, and that of reverse primer is 65.5. Can some one suggest how to get the best annealing temperature? Thanks...

01 March 2021 360 7 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

The reason that the culture of white fungi Contamination with green mold(Trichoderma), the culture autoclave at121 for 15 min. What is it?

Is the period to autoclave not enough? The inoculation in a hood and flame and UV and alcohol.

27 February 2021 9,356 3 View

How to include original NMR data in a manuscript?

hello. i am junior researcher. I received a comment from a reviewer that he could not find NMR data in my submitted paper. I had included the NMR graph with explanation and formula to calculate...

27 February 2021 734 4 View

Does different dilution factors affect negatively on NH3 reading ?

I have a sample of treated water sample & asked to obtain ammonia conc. in sample using a machine with 5-25 ppm detection range. However, upon testing with different dilution factors, all...

27 February 2021 8,483 3 View

Can anyone share his experience regards Smoothing in origin?

I am working on TiO2 composite material and the results of XRD have a lot of small/junk peaks and while I apply a smooth filter in Origin then the other characteristics peaks disappear so anyone...

26 February 2021 8,183 3 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

What is the biochemistry of acidic solvents for phenolics extraction in strawberry?

I am using the Folin-Ciocalteu method for analysis of total phenolic content in ripe strawberries. I've read several protocol that suggest a methanol/H2O/formic acid (80:19:1) extraction solution....

22 February 2021 6,560 3 View

What is the best etching method for Mg-Ca alloy?

I have used Picral etchant (4.2 g Picric acid, 10 mL Acetic acid, 70 mL Ethanol, 10 mL distilled water) but it didn't work. Is there any alternative?

21 February 2021 2,558 5 View

Can any suggest me good method of GC MS for the separation of Flavonoids?

I prepared the ethyl acetate, ethanol and butanol fraction from the ethanol extract of seed for isolation of Flavonoids. Amongst them ethanol fraction showing shinoda test positive for polar...

13 February 2021 8,263 3 View

No title

The Folin-Ciocalteu method is an electron transfer based assay, and gives reducing capacity, which is usually expressed as phenolic content. Can anyone share any reference paper where total...

13 February 2021 3,782 3 View

What is the best visualisation solvent for xylooligosaccharides using TLC?

I am interested in using TLC to detect non-linear xylooligosaccharides. What would be the best visualisation solvent? Would aniline phthalate solution be suitable? I have also seen people...

02 February 2021 7,748 3 View

Are any database collected cell penetrating anticancer peptides ?

Dear researchers, Anticancer peptides(ACPs) with cell-penetrating properties can enter to cytoplasmic space of cancer cells and induce cell death. but, I could not find the database that...

29 January 2021 707 3 View

How to calculate Total Phenolic Content and express it in mg GAE/kg?

26 January 2021 3,847 7 View

Equation to calculate Chlorophylls and carotenoids concentrations from a MeOH:HCl 1% (v/v) plant extract solution?

Hello everybody! I have performed an acidic MeOH:HCl 1% (v/v) plant extraction from Arabidopsis leaves to calculate Anthocyanins concentrations based on: Rabino, I., and Mancinelli, A. L. 1986....

25 January 2021 3,686 2 View

Can anyone help me to separate my phenolic compound in TLC with any new solvent system ?

My Compound is Leaf powdered Methanolic extract which is showing good phenolic compounds upon dipping in FeCl3. -My problem is phenolic compounds are not eluting with any common solvent system.

22 January 2021 4,693 7 View