Cross-sectional area and mesh sensitivity in lattice modeling of RC structural elements?

More Hamed Sadaghian's questions See All

Thermal and mechanical properties of concrete and steel after cooling?

How do the thermal conductivity, specific heat capacity, plastic strain, critical compressive displacement, and thermal expansion of both hot-rolled steel and concrete change after cooling based...

15 February 2021 1,385 5 View

What is the best word embeddings method should I use?

Hi dears If I want to do supervised multi-classes classification of specific domain such as history, using one of the deep learning techniques. Which is the best word embeddings method should I...

22 January 2021 1,290 5 View

What is the best lighting design for conservation?

In the museums, the sensitive organic materials need to be displayed under 50 lux or less and aways from any UV or IR. LEDs still have a little amount of UV. What is the better option? Is it...

20 January 2021 5,965 3 View

Fracture energy of concrete at sub-zero temperatures?

Both tensile and compressive strengths of concrete increase with the decrease in temperature. With this in mind and considering that fracture energy is in direct correlation with the so-called...

18 January 2021 8,778 4 View

Is it useful in texts classification to use the keywords expansion method for long-text examples in the training process for deep learning classifier?

Hello, Is it useful in texts classification to use the keywords expansion method for "long-text examples" in the training process for deep learning classifiers? Will it increase the efficiency of...

16 January 2021 9,291 3 View

Why the fracture energy of concrete increases with the rise in temperature?

Given the degradation of mechanical properties in concrete under elevated temperature namely, tensile strength, modulus of elasticity, compressive strength, etc., what is the justification behind...

15 January 2021 3,651 4 View

Is It useful to use text Pre-processing techniques (Stop Words Removal, Stemming) in the sentiment analysis classification?

Hello, I read some papers they used Pre-processing steps with text that will classify based on Sentiment Analysis. My question is, can I use text Pre-processing techniques in the sentiment...

11 January 2021 5,932 7 View

Will increasing the number of synonyms in training set increase classifier efficiency?

Hello, If I increased the number of keywords (Features) of examples in training set pertaining to a particular class regarding to Sentiment Analysis Classification , will increase the efficiency...

11 January 2021 5,299 4 View

What is the best classifier of Deep Learning techniques in Text Classification?

Hello, I've read many review papers about which is the best classifier of Deep Learning in "text classification", some researchers prove that LSTM is the best, Some say CNN is the best, and some...

10 January 2021 909 12 View

How to write a PHD proposal for a predefined research?

Hello everyone, I am aiming to write a PHD proposal of 1000 words. The research is described by the supervisor. That means, research questions, aim, and instruments are well defined by the...

01 January 2021 6,291 7 View

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10?

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10? Since, the growth curve from day 2 to 10 won't be like the "Logistic curve" it might not follow logistic...

03 March 2021 1,401 3 View

After a reference from Int J Body Compos Res, can any body help?

Hi, I am after the reference below, my library says it cannot obtain a copy either locally or internationally, any help appreciated! Chris Wang ZM, Heshka S, Wielopolski L, Pi-Sunyer FX, Pierson...

03 March 2021 6,193 1 View

What techniques can I use to determine the miscibility of polymer blends?

The term miscibility refers to the single-phase state in thermodynamics. I do not mean the compatibility of different components. To determine the miscibility I know several techniques such as...

03 March 2021 4,107 4 View

How to repeat an operation on an atom selection for multiple times in PyMol?

Hi, I am trying to construct a multi-layer fibril structure from a single layer in PyMol by translating the layer along the fibril axis. For now, I am able to use the Translate command in PyMol...

02 March 2021 4,569 4 View

Shall I skip the measurement model in SmartPLS?

Hello everyone, I had run a mediation model in SmartPLS using questionnaires that were already validated among my statistical population. A professor who edited my paper -though she is not...

01 March 2021 3,052 3 View

What is involved in morphological changes of SEM images of a substance?

In the sem analysis of CaCO3 nanaoparticles, the morphology images showed spherical shaped particles but the proposed morphology for these type of nanoparticles is trigonal. I prepared the...

01 March 2021 1,960 4 View

Joint behaviour in Abaqus is not captured well?

I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...

01 March 2021 6,661 3 View

How to define tie constraint between rigid body and another part in dynamic explicit model of Abaqus?

Hi dear researchers I connected a rigid body into the part of my structure by tie constraint and then I added displacement to rigid body, in static general step every thing is fine and these two...

28 February 2021 3,442 2 View

Does the circuit modeling for planar monopole antennas using Foster canonical forms give good approximation?

Hi researchers, I am searching for some accurate way to do the circuit modeling of planar CPW-fed monopole antennas. I have gone through the literature where mostly circuit modeling is done using...

28 February 2021 7,016 1 View

How to modify Johnson cook equation in ABAQUS?

I wanted to add an extra parameter to the existing Johnson cook equation in the ABAQUS simulation. How to add those extra parameters. Ref: A modified Johnson-Cook material model with strain...

28 February 2021 4,841 3 View

Andrey V. Zakharov

First of all the characteristic size of mesh must be smaller than characteristic size of the object to be modeled. If you model a beam with linear sizes 10x1x1, the mesh step must be near 0.1 or smaller.

Regards

Hamed Sadaghian

Andrey V. Zakharov Thank you very much for your answer