I am trying to simulate the influence of the addition of silica (500 nm) particles on the kinetics of moisture sorption and thermal degradation kinetics of HDPE.
I can't get cygwin64 running on my system again though I created the path for it in the system variables. Programming UNIX Windows gcc-core
08 September 2018 8,199 3 View
Hygrothermal Modeling and Simulation Hydrodegrdation Modeling and Simulation
08 September 2018 9,507 0 View
Multi-Phase Composites Modeling and Simulation
08 September 2018 9,160 3 View
Molecular Dynamics Simulation Perl Strawberry Scripting
06 July 2018 6,156 2 View
I have three components as shown below: x1 + x2 + x3 = 0.7 of total mixture (Grade 1) x1 + x2 + x3 = 0.9 of total mixture (Grade 2) x1 + x2 + x3 = 0.11 of total mixture (Grade 3) Mixing...
05 June 2018 1,522 0 View
Urgent
31 December 2017 1,204 4 View
Modeling and Simulation Atmospheric Corrosion Dezincification Comsol Multiphysics and Corrosion Module
07 August 2017 7,539 0 View
Kanaun-Jeulin methodology Estimate based upon energy-based effective strains Effective Field method Mori–Tanaka method (Multi-Phase and Multi-Step Approaches) Benveniste approach
05 June 2017 5,935 4 View
Non Isothermal Degradation, Kissinger Model, Flynn Model,
08 September 2016 3,441 9 View
I am not sure if any of the conventional approaches employed in determining the kinetics of thermal decomposition of polymers would work for me since I used a single heating rate (10...
08 September 2016 3,596 4 View
I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...
09 August 2024 5,048 2 View
Hi! So i attempted to understand a novel protein behavior towards heat application by analyzing its secondary structure change. I subjected the protein to a thermal denaturation analysis using...
06 August 2024 1,989 3 View
What is the most suitable experimental setting to understand the consequences of a particular gene: (1) targeted degradation of the specific transcription factor (TF) of the gene, followed by...
04 August 2024 6,265 1 View
I am not able to find how I can provide tangential stiffness in ansys workbench The normal stiffness option is there. But how I can enter tangential stiffness I have read somewhere tangential...
29 July 2024 2,032 2 View
Hello. I have the geometry of a blade in CAD file (stp) and I want to prepare the blade for meshing with turboGrid. I must import this file into designModeler and then transfer to the...
27 July 2024 356 3 View
What is the thermal expansion coefficient of human muscle?
27 July 2024 7,190 0 View
Hello; I am conducting a CFD study on two-phase flow in a separator, utilizing refrigerant as the working fluid. For this study, I have implemented pressure inlet and pressure outlet boundary...
25 July 2024 2,309 5 View
I’m having difficulty achieving high RNA integrity in my samples. Although the 260/280 and 260/230 ratios are satisfactory after RNA extraction, the RNA samples show signs of degradation when...
22 July 2024 155 4 View
I performed fea on tensile dog bone specimen using ANSYS static structural and also tried using ANSYS explicit dynamics. In experimental result the load is 500 N and deformation is 0.6 mm...
13 July 2024 3,631 4 View
I want to extract glycosides from my mangrove leaf samples, but my laboratory lacks an incubator capable of reaching temperatures above 60°C. The paper I am following specifies a minimum...
13 July 2024 3,686 0 View