Mechanics is the branch of science concerned with the behavior of physical bodies when subjected to forces or displacements, and the subsequent... | Contact experts in Mechanics to get answers
2,202 views 370 posts
Questions related to Mechanics
By inward inflation, I mean vacuum inside the membrane (such as a cylinder with closed ends) leading to its crushing by atmospheric pressure.
24 June 2017 2,905 3 View
Is there any relation between L and h in the beam to classify it as slender, intermediate, or short? Neglecting the use of relations obtained in norms.
06 June 2017 8,661 9 View
Planned to attach a C clamp like stiff wire on 0.482 mm x 0.64 mm rectangular dental archwire. Is there any possibility? Constraint is that C clamp must with stand applied force (Rotation)...
06 June 2017 5,875 1 View
I want to obtain stress - strain relations for a finite sized spring network and obtain the bulk modulus B and shear modulus G. I need some references. Any help would be appreciated.
06 June 2017 2,291 3 View
06 June 2017 1,553 3 View
any
06 June 2017 9,807 0 View
Several papers tend to bring in generator torque, and also electrical torque, which I think is the same thing as electromechanical torque. The issue is that all these terminologies get mixed up so...
06 June 2017 7,196 6 View
can anyone explain the working principle of binders how it improves mechanical strength
06 June 2017 1,773 0 View
we can define any function in: Solution>Define Loads>Apply>Functions>Define/Edit and then after saving the function we define the output of the function e.g Pressure, Force etc. but i...
06 June 2017 8,988 1 View
Hello everyone, I'm looking for a method, either analytical or numerical, able to measure the friction force acting on a ball falling in a non-newtonian fluid with a yield stress (the simplest...
31 May 2017 8,858 5 View
Hi I am using a plain strain 2 layered model to simulate a sinkhole mechanism and want to introduce softening parameters in my model to simulate a condition where the hole propagates upward due to...
18 May 2017 9,018 1 View
For example, when looking at this hysteresis curve of a retrofitted masonry shear wall (see attached figure), the load-displacement curve at the encircled spot drops back almost vertically. Which...
18 May 2017 6,829 2 View
Hello, worldI've run a 3D simulation of solid mechanic when I'm trying to use contact pairs.In the model I have three parts, the first is constrained, the second is the membrane which is in...
17 May 2017 6,600 9 View
suppose a body falls on a surface from a certain height. now due to sudden impact, an impulsive force will be generated which will vary with the time. so what will be that variation of impulsive...
16 May 2017 4,064 3 View
05 May 2017 7,917 6 View
new materials in mechanical engineering
05 May 2017 6,837 7 View
Get me tips to better execution
05 May 2017 1,287 1 View
05 May 2017 3,164 2 View
Indentation of tubes under combined loading T Wierzbicki Abstract A theoretical analysis is presented of the problem of large plastic deformations of tubes subjected to combined loading in the...
05 May 2017 2,845 4 View
05 May 2017 6,590 3 View
Surface tension is influenced by the cohesive forces of the molecules and viscosity is related to the shear stress in the solution. It seems like both involves the performance of molecules....
05 May 2017 8,119 4 View
Hello, dear colegues! What is the strain energy density in ANSYS? How does it calculated in case of multilinear hardening? Does it correspond to the value obtained experimentally as an area...
23 April 2017 8,148 1 View
I would like to know the accuracy (+/-) of "dial-a-flow") fluid administration tubing as compared to mechanical positive pressure medication pumps
04 April 2017 5,620 0 View
In order to achieve fastest acceleration and top speed. 4WD or RWD? Why and why? Need a brief and solid explanation.
04 April 2017 4,687 1 View