Contact experts in Mechanical Engineering to get answers
2,073 views 3,581 posts
Questions related to Mechanical Engineering
There are a method that used in this paper attached by M. F. Mansour, but it is operated by GeoStudio 2007.
22 May 2021 4,818 1 View
Hello, dears. I can not manage these steps. please help me. To apply preloading on the bolts I want to do the following steps from this article: The Guidelines for Modelling the Preloading Bolts...
20 May 2021 3,525 0 View
While performing a Kinematic and compliance analysis in MSc adams, I'm getting following error message. ---- START: ERROR ---- This command cannot be processed until a model has been...
12 May 2021 6,190 0 View
Finite Element Method Thanks in Advance.
09 May 2021 8,809 12 View
The Young's modulus of an object is defined as the ratio between its stress and strain: Y = σ/ε , Y = F*L/A*ΔL From the Hooke's law, F = k*ΔL By combined the previous equation, the spring...
06 May 2021 9,883 5 View
β oxidation requires sufficient oxygen when glycerol is converted into dihydroxyacetone acid, which enters the sugar metabolism process; fatty acids are converted into fatty acyl-CoA, which enters...
02 May 2021 7,928 2 View
I am trying to use ALD1102 dual mosfet in proteus. I attached its spice model to the generic mosfet available in proteus, but that didn't have a separate body terminal. I need to attach that...
30 April 2021 970 2 View
In addition to EMG activity recording for the whole activity, we would like to measure muscular fatigue before and after specifics motor tasks by using a static test. Is there a previously tested...
22 April 2021 6,719 2 View
Hello everybody, I'd like to model an elastic supported beam with a crosssection in Ansys. I need to change the stiffness of the springs under the nodes seperately. Does anybody know, how to...
21 March 2021 3,420 7 View
Any suggestions on what type of cell is better for CO2R? Here we have H-type cell, which is simple but comes with the penalty of slightly less F-efficiency. We want to transfer to flow cell? Just...
17 March 2021 7,170 2 View
Are those available in Sri Lanka and what about its market price?
08 March 2021 1,545 2 View
I have radial blade centrifugal fan design which will be mounted on exhaust side of electric traction motor. The fan will be mounted on same motor shaft inside the housing. How can I verify that...
24 February 2021 2,695 3 View
In metals and alloys, generally when the stress generated exceeds yield (ductile) strength, it is implied yielding or failure occurs. Similarly, in the case of finite element analysis of...
21 January 2021 8,827 4 View
Hi I have a problem where I am trying to vary the stiffness spatially across a structured interface. The whole idea is to vary the stiffness vertically, with a bulk stiffness of 8GPa decreasing...
07 January 2021 573 3 View
I need the following tutorial zip files to learn the basics of the software: Using sliding and dynamic meshes Modeling solidification Using the Eulerian Granular Multiphase Model with heat...
04 January 2021 6,063 5 View
Dear Research Gate Members, Online Education / Distance Learning and Work From Home (WFH) are the ultimate new realities for many in the world due to Pandemic Novel Corona Virus (COVID-19)...
30 December 2020 10,060 37 View
Dear Research Gate Members, Nowadays, everyone is talking about the new variant of Corona virus COVID-19 and its affects are alarming throughout the world. Please, share your expert suggestions...
30 December 2020 7,729 20 View
hi hope you are well in this current climate, I am doing a project on Catia where i need to design a scissor jack like the one attached. however i wanted to know how i can calculate the...
27 December 2020 7,870 3 View
Hello! I am trying to define/assign initial stress to a coating I modeled on a substrate. I defined the coating using "skin" function. I have tried "predefine filed" in load section. But it only...
11 December 2020 3,147 8 View
Hello! I'm trying to model a multi-layer coating on a substrate in abaqus. The layers are homogenous and isotropic. My question is how should I approach the modeling? WHAT I'VE TRIED SO FAR: I...
10 December 2020 1,590 3 View
CdO nanoparticles were prepared with addition of CTAB surfactant with increasing concentration(0.04M, 0.08M and 0.12M) of CTAB. Crystallite size is increasing with increasing of concentration.How?
10 December 2020 8,643 1 View
I am working on a capstone project for my mechanical engineering degree. Our design is an attachment for dental drills that will detect the drilling depth as the procedure is happening and will...
07 November 2020 3,408 6 View
Dear Researchers, I would like to compare the environmental load of dry and wet grinding under laboratory conditions (later with the scale-up method also for operating conditions). I have already...
01 November 2020 6,902 11 View
I am required to perform turning operation at constant velocity and depth of cut but for different feed using Abaqus. However I can't understand how do I associate feed in my model/simulation.
31 October 2020 7,067 2 View