How to make a new mosfet component in proteus?

How the Ground Plane implantation is performed without damaging (and w/o varying the undoped nature) the top Si (8-10 nm) in FDSOI technology ?

It is a general practice to introduce Ground Plane in FDSOI devices under the BoX. The Ground Planes are introduced by Ion Implantation through Top Si layer and Buried Oxide. I wanted to know that...

24 February 2021 5,974 4 View

High Power control for 48V battery pack - High current control?

Hi, I am working on 48V Lithium-Ion battery pack. I am wondering if there is fast MOSFET (or any other technology), to control the current of charging and discharging the battery with high...

20 January 2021 1,717 4 View

MOS Capacitor instance or a mosfet used as a cap (D-S-B connected to gnd)?

Hi, in Cadence Spectre simulations should I use a MOS cap instance or a mosfet (D-S-B connected to gnd) to simulate a real life MOS-cap? I tried both of them and they gave different results i.e....

26 December 2020 6,407 1 View

1. Write an assembly program to achieve the addition of two numbers entered to port B and display the result on port A?

1. Write an assembly program to achieve the addition of two numbers entered to port B and display the result on port A. Simulate the program using the circuit shown in figure via Proteus software....

17 December 2020 6,970 2 View

Substrate functionalization and antibody deposition for biosensor work?

Hello, I am a bio student working in a lab on his free time and I just started working with an engineering group on sensors. My questions are: 1)Functionalization steps and what are the best...

21 November 2020 7,996 2 View

How to design a control feedback loop to control duty cycle for voltage regualation of AC to DC converter ?

I am working on a project in which I need to control the duty cycle of the pulse given to mosfet in an AC to DC converter.The mosfets are connected to LCL filter to give a regualted 5V.The output...

15 October 2020 6,318 6 View

Does a short circuit between mosfet differential pair act as a AC ground for small signal Analysis?

I'm working on Bipolar shaper amplifier and solving some circuits. As shown in attachment the drain of two Mosfet pairs are shorted. Does that serve as AC ground in small signal analysis? I've...

30 March 2020 4,696 4 View

How to define workfunction for a particular section of the GATE in ATLAS Silvaco TCAD?

In the picture given the work function of the lower section of the gate material is chosen to be N+poly-Si (work function,4.17 eV) and the upper gate material is chosen to be P+ poly-Si (work...

22 March 2020 6,981 4 View

How to calculate MOSFET losses in an inverter topology at different power levels?

I want to simulate an inverter topology using PSIM thermal module to calculate MOSFET switching and conduction losses at different power levels. How I can adjust different power levels in...

24 February 2020 7,122 2 View

How can you derive the specific on resistance (Rds(on)) in a power MOSFET using Silvaco tool?

Can anybody explain to me how to find the specific on-resistance in power mosfet or LDMOS or any mosfet using Silvaco.

10 February 2020 6,863 2 View