Contact experts in Mechanical Engineering to get answers
1,531 views 3,357 posts
Questions related to Mechanical Engineering
I have been working with the same system for a year now. I fabricate the PDMS molds through soft-lithography, and then I bond the PDMS to a coverslip via plasma treatment and bake the microchips...
27 April 2023 7,573 2 View
Dear researchers, I would like to appreciate if someone suggest me how to collect the patent data for pharmaceutical companies in Europe. Is the source available without any charge? Practical...
20 April 2023 2,846 2 View
I would like to consult an expert in "Thermo-Calc" software to interpret some of the results, Because there is a difference in the results according to the databases, if possible.
03 April 2023 3,591 2 View
How does the morphology of different thickness alloy films changes upon heat treatment at the same temperature??
14 March 2023 7,059 1 View
How can I determine the best RPM and balls to powder ratio for wet Ball Milling?
10 March 2023 541 4 View
What is ASTM number to be followed for wear testing of Aluminium composite sheet of thickness 2mm to be conducted on Pin-on-disc device?
10 March 2023 8,263 4 View
I have calculated the uncertainty from repeated measurements. Is it possible to have an uncertainty value, which is lower than the accuracy (given in the specification) of the instrument?
27 February 2023 5,891 6 View
Hello good people I am simulating multipass multilayer additive manufacturing with ANSYS transient-thermal module. The problem is that the Gaussian heat source (APDL code) works fine with the...
14 February 2023 5,760 2 View
Can anyone explain to me how to do element birth and death techniques in ansys apdl since I need to simulate Welding or welding or Arc based additive manufacturing
11 February 2023 8,504 3 View
I have a drive shaft connected to a torque sensor but to avoid damage I must constrict the linear motion to pure rotational motion of the shaft. Although the displacement of the shaft is a few...
05 February 2023 3,086 1 View
2 non-consecutive nodes
03 February 2023 1,131 1 View
If I have RC barrier which is buried by 1 m of soil and subjected to blast load , how can I simulate earth pressure in ansys autodyn ?
16 January 2023 320 0 View
Dear propfessors, Is there any template for me to design a pilot study in a higher educational research for my PhD? The actual study is designed as a mixed-methods research. Specifically, a...
14 January 2023 5,828 3 View
The use of different methods in teaching chemistry
04 January 2023 336 2 View
There is such dataset for Canada -https://figshare.com/articles/dataset/Soil_organic_carbon_stock_and_uncertainties_1m_depth_at_250m_spatial_resolution_in_Canada_version_2_0/16686154 if someone...
03 January 2023 2,237 0 View
I am working on logistic maps. Can anyone help me in getting the matlab code for trajectory of logistic map, that is graph code for plot of x_n vs N for different values of r. I shall be thankful...
31 December 2022 1,977 5 View
Teaching and learning
28 December 2022 6,278 7 View
What is its significance and can it be obtained for every alloy?
17 December 2022 1,652 1 View
Hi everyone I want to compare a monolithic polymer composite sample and a 3D-printed polymer composite sample. However, I need some references for this matter. Any contribution would be...
16 December 2022 2,301 7 View
Hello. I just wondering if I have any polymorphic bands on these ISSR-PCR? And reasons for their absence. 'N' are control plants, and I don't see any difference between them and the last samples...
04 December 2022 4,973 3 View
Hello everyone! In LS-Dyna, I use a User-Defined Material. I'm trying to find how to implement behaviour in LS-Dyna similar to subroutine UEXPAN in Abaqus. - can be used to define incremental...
30 November 2022 4,074 1 View
Making a determination of fecal and total coliforms, my tubes have tested positive, so the positive EC was transferred to an EMB Levine plate where the incubation was 24 hours and these bacterial...
27 November 2022 7,921 1 View
The literature papers that I have gone through have discussed about the main settings that have been used such as the boundary conditions, material conditions and methods which have been really...
18 November 2022 8,925 0 View
İ make a new composite material which has very durable top side but very weak bottom side. That is, when it was forced from top side it can be endure the force but when the force was applied on...
10 November 2022 8,377 2 View