Contact experts in Manufacturing to get answers
4,562 views 450 posts
Questions related to Manufacturing
A proper design (for instance with high optimization conditions: volume, losses, quality) uses accurate parameters of the electronic components and materials included. But there are serious...
08 August 2017 8,904 2 View
In the TBM ROP's data, we have certain numbers almost between 0 and 4 m/hr but which range is known as high penetration rate or low penetration rate? are there any specific criteria? for instance,...
08 August 2017 3,021 1 View
Could you please suggest me the best topics in the area of Industrial Relations(IR) to my M Phil & PhD., and what are the most recurring IR issues manufacturing industry is facing today and...
08 August 2017 9,087 2 View
Geopolymer powder. Manufacturing techniques - Possible mix design - Curing conditions
08 August 2017 7,257 4 View
What are the reasons for using gallium nitride in the manufacture of LEDs?
08 August 2017 5,573 5 View
Hello all, For some research on super(sub)critcal fluid extractions, I am examining SFE CO2 systems. On websites of manufacturers of these plants they state that the CO2 used in extraction can...
08 August 2017 4,466 5 View
Is it possible to measure the axial load on 3D printed cylinder using a strain gauge? Since 3D printed components are manufactured using layer by layer technique, I wonder whether the strain is...
08 August 2017 3,705 3 View
Title: Influences of Personal and Organizational values on Organizational commitment and Job satisfaction among industrial employees. Target Group: shop floor level employee. Translated...
08 August 2017 2,182 13 View
Is there anybody who're able to identify this rapid diagnostic malaria-test (I assume it only detects falciparum-parasites)? I'm looking for the manufacturer - there's nothing to see on either...
08 August 2017 5,228 3 View
Currently, I have joined a manufacturing company as a fresh graduate and they base their parameters on trial and error or experience. However, I think there is a more "scientific" way. I have...
08 August 2017 424 3 View
Any inputs on 3 D printing of human spare parts ? What are the bio compatibility issues with additive manufacturing ? What are the possibilities of growing tendons, tissues,ligaments and cells on...
08 August 2017 809 0 View
What plasticizers could you recommend for Cellophane. How to plasticize Cellophane - at some stage of film manufacturing ? or via swelling ?
08 August 2017 1,611 5 View
Please suggest the similar grounds for comparing Manufacturing sector and Construction sector in terms of safety management.
08 August 2017 9,348 9 View
What lean tools and system (lean product development) structure will you suggest? Thanks
02 August 2017 9,330 5 View
Manufacture claims that he use only fresh cow milk in his pasteurize milk and UHT milk. But consumers said that he added some powder milk in his diluted fresh cow milk.
07 July 2017 620 4 View
provide me with the details of the manufacturer, type of micropipette and the things to consider while buying one for handling of viscous solutions. thanks in advance:)
07 July 2017 6,335 0 View
All over the world which sell commercially produced radiopharmaceuticals in-house kit manufacturing locations.
07 July 2017 6,350 0 View
The design specifications of any device are subject to many factors, the most important cost of design versus quality of performance.
07 July 2017 4,443 10 View
The most important aspect of manufacturing markets is providing a competitive ecosystem for firms and the teeth for regulatory agencies. After all, there is no point of manufacturing a market...
07 July 2017 8,432 0 View
I am looking to see if there are articles on the propagation of demand beyond the manufacturing line or service delivery into direct and indirect overhead. If so, how is it performed?
07 July 2017 2,024 0 View
What are three examples in which a manufacturer may be sued for failure to warn consumers of the risks involved with the use of its product?
07 July 2017 4,554 2 View
What are examples of some structures that can not be printed via conventional additive manufacturing techniques such as stereolithography, or require extensive topology optimization?
07 July 2017 388 2 View
Rubber layer to rubber layer, petroleum(petrol) can be use to enhance stickness of these rubber layers. I like to know any other product that do the same as petroleum(petrol. thank you
07 July 2017 4,153 1 View
how to manufacture the die responsible for making soft gelatine capsules? how to manufacture the die responsible for making meat burger?
06 June 2017 10,055 0 View