Contact experts in FLUENT to get answers
2,050 views 3,563 posts
Questions related to FLUENT
Hellow Everyone . I have a query that i have build a monomer of both phospholipids and glycolipids for Md Simulation but the problem which i face is that once i go to tool/software and put the...
07 August 2023 2,785 0 View
Hello everyone, Im studying an airflow inside a finned tubular heat exchanger at various inlet velocities in Fluent. Starting at 10 ms inlet velocity it runs smoothly and converges but with...
27 July 2023 5,920 4 View
Greatings, How to create a swirl at the exit of a conduit in Fluent? Is that possible in 2D? In that case what are the governing equations? For 3D case, what are the governing equations? Thank...
21 July 2023 4,358 10 View
How the choice of alpha = +1 and -1 for CCD is established?
18 July 2023 4,469 1 View
In my research, i have to use some companies confidential data for which companies are not permitting to use their names. How can i incorporate such data in my thesis and how to prove that such...
18 July 2023 2,380 2 View
Hi Lattice Boltzamnn and CFD experts, I'm implementing MPI for a 3D lid-driven cavity flow using a basic setup with just two processes. I have successfully implemented it with a simple case where...
14 July 2023 3,767 0 View
Reservoir Engineering 1. Whether Stokes equation that characterizes low Reynolds number incompressible flow of a single-phase Newtonian fluid in a rigid porous medium governed @ pore-scale with...
14 July 2023 4,563 0 View
I'm running a surface reaction. I'm wondering how does ANSYS Fluent calculate the surface deposition rate? Thank you.
14 July 2023 532 2 View
Some time density purify fluid.
14 July 2023 7,740 0 View
I want to see the correlation between PM2.5 and Ozone over different regions in India, which data shall be used daily mean or hourly mean data
10 July 2023 6,960 2 View
Hello everyone, I want to use an input parameter from workbench to define the specific heat of my working fluid. Do you have any idea how to do this? Should I use udf? The Cp is not dependent on...
03 July 2023 9,444 3 View
Weather stations are key facilities to record long-term change in surface air temperature (SAT) in land. However, some weather stations are located in or near cities, and they may suffer from...
21 June 2023 8,831 2 View
Dear ResearchGate community, I am currently working on a steady-state thermal analysis of a hollow wall in Ansys Fluent where a low emissivity insulation material is attached to the inside of the...
14 June 2023 9,814 2 View
How can the experimental results of small-scale marine structures be applied to the force calculation of large-scale marine structures?
01 June 2023 7,987 0 View
Hello! We pump the contour of a metal tube with a diameter of 3 mm with oil with a viscosity of 0.0031 kg / m * s (abt. the viscosity is 4 times higher than that of water). We are interested in...
31 May 2023 3,566 8 View
i need way to extract the nodal coordinate of deformed shape i use this but show just coordinate of undeformed shape Main menu > List > Nodes > (Coordinates only) Main menu > List...
27 May 2023 258 0 View
I want to make a simulation for 400 time steps, how can I give in Ansys Workbench?
22 May 2023 5,545 4 View
I am using openfoam to calculate the flow field of a rectangular section channel with a cage in it and try to analysis the influence of the blockage on particles transport. I plan to inject...
14 May 2023 4,450 2 View
Hi all, I am currently working on simulating a water jet problem, where water is injected from the left boundary and exits the domain through the right boundary. However, I am facing a challenge...
11 May 2023 2,420 9 View
I have been searching for ASTM/ISO standard procedure to determine the tensile properties of shape memory filament used for 3D printing. I have come across ASTM D638 but this procedure uses 3D...
03 May 2023 5,430 1 View
I am working on simulation of savonius hydrokinetic turbine in cfx. I have set inflation layer on turbine as shown in photos. It is observed in the previous investigation that, the non-dimensional...
24 April 2023 2,960 3 View
I'm studying the combustion of boron particles in a combustion chamber. Because the surface of boron particles is covered with boron oxide, the combustion of boron particles is divided into two...
21 April 2023 2,564 2 View
I was trying to use chtMultiRegionFoam solver but it shows fatal error.
06 April 2023 4,772 0 View
Hello, I would like to know how to simulate water diffusion through a porous region using Ansys Fluent. Specifically, I am interested in simulating the following problem: There is a pipe with...
15 March 2023 4,184 1 View