Abaqus

Contact experts in Abaqus to get answers

17,999 views 5,564 posts

Questions related to Abaqus

Need guidance in plotting force deformation curve from Numerical Model in DIANA FEA?

Dear All! I am modelling an RC Frame in DIANA FEA and comapring the results with the experimental data. I am using Material Model for Concrete for Compression as "Parabolic", For Tension as "JSCE...

20 October 2023 8,114 0 View

Can you kindly suggest project topics relating to IoT or cybersecurity. ?

With security and pricacy in mind. The project should have a non challenging artifact

18 October 2023 9,189 5 View

How can I study the effect of gear backlash using ANSYS? How can i estimate the amount of backlash size on the meshed gear geometry?

please help me

16 October 2023 3,817 1 View

Does someone knows about continuous negative eigenvalues errors in abaqus for End Notched Flexture test on a composite beam with a precrack?

Dears, I confront some errors in abaqus for End Notched Flexture test on a composite beam with a precrack. There are 2 : The first is ((The system matrix has 3 negative eigenvalues)) during my...

15 October 2023 4,073 7 View

Be sure only Stresses are selected and click on “Apply to Dataset List” ?

While using fesafe for PSD analysis of a model containing welds for parent we need only stress to be selected whereas for welds we need forces. So, how to proceed when using verity for welds?...

13 October 2023 2,728 0 View

How to seperate cinnamaldihide in cinnmon leaf oil? What is the techniques ?

give me brief explain

13 October 2023 9,332 0 View

How to get stress values along with life and damage in Fe-safe when the pre processing has been done in Ansys?

I am currently doing PSD Analysis in fesafe, after taking the required files from Ansys i am unable to get the stress values in fesafe output window. Is there any option that i may have forgotten...

12 October 2023 7,041 1 View

Looking for dissertation topic in network computer for my degree ?

could involve security

11 October 2023 1,346 7 View

Does the results obtained with the cracked version of SAP2000 match with licensed version of SAP2000?

I am trying to verify the results obtained by modal analysis and response analysis of a G+4 RC hill Building with the base paper results but unfortunately couldn`t. Although I have followed all...

10 October 2023 7,523 9 View

Abaqus Naural frequency analysis?

Hello everyone. When I try to find the natural frequency of the beam 3D frame, it does not match the actual result. What can be a region in Abaqus? Why the frequency on Abaqus is not matching? The...

09 October 2023 896 3 View

When temperature is constant and volume increases what happens to pressure and relationship between pressure and temperature in liquids?

04 October 2023 4,335 0 View

What is the suitable interaction between two faces, concrete , in Abaqus ?

How can I effectively model the interface between two sequentially cast layers of Normal concrete in Abaqus, where the first layer (20cm thick) is cast, and the second layer (5cm thick) is poured...

29 September 2023 4,344 1 View

Strain tensor values at Gauss points for Timoshenko beams ?

Hello, I would like to compute de the stress tensor of a Timoshenko beam at its Gauss points, to be able to implement an elastoplastic law in my finite element calculations. Firstly,I know the...

28 September 2023 1,994 2 View

Material properites of modelling of steel (crushable foam) for Abaqus ?

In my study, jellyroll is modelled as steel (crushable foam) which is analogous to those used in 18,650 lithium-ion batteries. Can someone provide me the material property of steel (crushable...

27 September 2023 7,379 3 View

How to determine the hydrogen bonding cross-linking occurring between polymers?

When I was doing a blend of two polymers, I determined from the literature that a cross-linking reaction with hydrogen bonding would occur between them. Hydrogen bonding occurs when a hydrogen...

26 September 2023 5,594 1 View

What are data collection methods and protocols for transferring sensor data from the IoT devices to a local server?

I am trying to explore data collection methods and protocols for transferring sensor data from the IoT devices to a local server.

26 September 2023 2,056 8 View

How to read .wdf and .wxc file format (Raman spectra)?

I measured some samples for Raman spectra (Renishaw). The obtained data are in .wdf and .wxc format. These data can be accessed by WIRE software (Renishaw), which is not open-source/ free. Is...

26 September 2023 2,584 5 View

Could you please pass the survey to everyone in the field of artificial intelligence and cybersecurity to answer my thesis questions?

https://docs.google.com/forms/d/e/1FAIpQLScgbl0RGsm1InNi0quwrfjqMxpRnOukudh4OPLqOhWu6Tz1gw/viewform?usp=sf_link

23 September 2023 8,894 5 View

How to spatially interpolate mechanical properties in Abaqus between several points?

I have a measured the young modulus and yield strength of a material at different points. What would be the best way to apply spatially varying material properties along a mesh by interpolating...

22 September 2023 4,382 2 View

Problem tu converge Sequentialy coupled temp model in abaqus?

I am attempting to create a model of speed core walls (concrete-filled panels) subjected to fire loads in abaqus, using two analyses. The first analysis involves heat transfer to obtain...

22 September 2023 5,939 5 View

In Mindlin's 1936 solution for a buried point load in a homogeneous elastic halfspace, is Fig. 6 of his paper correct?

I'm referring to the paper: Mindlin, R.D. (1936) "Force at a Point in the Interior of a Semi-Infinite Solid", Physics 7, 195-202 (1936). By plotting "w" from Eq. 18 as a function of x for y=z=0,...

21 September 2023 5,968 1 View

What should be material type of thermal boundary resistance (TBR)?

Dear all, I am simulating a PCM structure in Sentaurus TCAD. The structure uses a thermal boundary resistance (TBR) of a width of 1 nm. I am writing to ask what the material type of the TBR...

21 September 2023 3,201 0 View

How to calcualte these values?

Damage to the columns most exposed to explosion Charge (mass / kg) φj1,C1 φj2,C1 φj1,C2 φj2,C2 φd,PC1 φd,PC2 degree 1 0.0044 0.0226 0.026 0.1632 2.00 5.00 10 0.0539 0.0745 0.8674 1.8231 2.00 5.00...

20 September 2023 4,722 1 View

Why is FORTRAN still being used to write CFD codes?

FORTRAN in CFD Solvers

18 September 2023 4,504 6 View

Badges
Science topic