Qusay A. Al-Kaseasbeh

16 Questions 27 Answers 0 Followers

Questions related from Qusay A. Al-Kaseasbeh

Could you get me this report, please?

Public work research institute of Japan. 1997–2000. Report of cooperative research on limit state seismic design for bridge piers, I-VIII and summary.

04 April 2018 7,229 1 View

Why assigning the shell section by selecting middle surface, top surface, or bottom surface to represent the reference surface makes difference?

I'm modeling thin-walled columns using shell element in ABAQUS. I'm using different ways to shape the geometry to end up with the same final configuration whatever the way is. I noticed that when...

10 October 2017 1,131 0 View

Do I need to do Symmetry for beam element?

Dear all, I'm trying to reduce the computational time for a model which contains circular shell element and beam element (with pipe profile) in the top ( see the attached pics). Do I need to do...

06 June 2017 8,679 3 View

What are the parameters should I input for this UMAT code to get results similar to ABAQUS GUI?

I just wrote the Isotropic Hardening rule Fortran code (attached below), which is similar to what's available in ABAQUS library, if you have experienced with this code before, what are the...

01 January 2017 6,031 3 View

What's the procedure to get the original written data from a figure in published paper?

I'm wondering if there is a way to get the original data for some figures in published research papers? I've tried to contact the authors, but no responses come back, could I get this data from...

12 December 2016 9,817 2 View

Thin-walled column under constant axial and lateral cyclic loading?

Hi, I'm modeling thin-walled column under axial loading and horizontal displacement as shown in attachment 1 using displacement control (Boundary conditions). I decide and input the horizontal...

10 October 2016 5,775 7 View

Link ABAQUS 6.14 with intel parallel studio XE 2016?

Hi all, I'm trying to Link ABAQUS 6.14 with intel parallel studio XE 2016, and Microsoft visual studio 2013 professional, could you please tell how I can do that? or what kind of Intel parallel...

10 October 2016 2,115 5 View

How can I export or import part, sketches or assemblies from ABAQUS?

I want to use the same geometry that I drew it in ABAQUS and import again in a different ABAQUS model (not copying). I'm trying with File-export to save it, but when I'm gonna import it again, it...

10 October 2016 6,557 4 View

How can I model thin-walled steel column under constant axial and alternating horizontal load under displacement control at the top of the column?

Hi all, I'm trying to model this geometry (Fig. 5 in the attached file) using kinematic hardening in ABAQUS, and I have been stopped for unknown reason, Could you please guide me especially how to...

09 September 2016 5,985 4 View

Where could I find a good documents for Abaqus learning?

Hello all, I'm gonna work on ABAQUS( Mainly dynamic modeling such wave propagation). Could you please share with me any useful documents to understand thoroughly? Thanks!

05 May 2016 4,618 4 View

Is potentiostat EIS appropriate to study the weldment corrosion for scribed coated samples?

I have 3 coatings and my interest point is to investigate the weldment corrosion behavior under these coatings. I'm gonna use Potentiostat EIS with scribed coated samples since I'm focusing on...

09 September 2015 4,931 9 View

Which one is first Potentiodynamic or Rp/Ec trend?

For experts in electrochemical testing I'm going to use potentiodynamic to get material corrosion behavior and Rp/Ec Trend to get corrosion rate plot . You know potentidynamic changes the...

07 July 2015 4,102 3 View

What's the difference of running cathodic or Anodic potentiodynamic sweep separately or running the potentiodynamic together?

what's the difference of running cathodic or Anodic potentiodynamic sweep separately or running the potentiodynamic including cathodic and anodic together at the same time ( example -5mv to 5 mv )?

07 July 2015 398 10 View

What are the reasons behind overload ( I overload and CA overload)?

I was running potentiodynamic test, while the test I got overload ( I overload and CA overload). based on Gamry maybe the surface area is too big so the potentiostat cannot measure the current,...

07 July 2015 929 5 View

How could I get corrosion rate-time relationship from Polarization resistance (PR ) & Tafel tests?

I'm going to use Polarization resistance (PR) & Tafel tests to measure corrosion rate of welds , Is it possible to get Corrosion rate-time relationship from these techniques? Thanks

06 June 2015 6,018 3 View

How to calculate the equivalent moment of inertia for stepped circular column?

Is there a theoretical way to calculate equivalent moment of inertia for stepped circular column? Example: The column (attached in Figure 6 below) has stepped circular cross sections and the...

01 January 1970 5,783 0 View