What is the best way to calculate the angles of twist for concrete columns subjected to torsional moment using finite element software?

In Finite element software like ANSYS , there is difficulty in obtaining direct results of twisting of concrete members because SOLID65 which is the unique element designed to represent concrete...

26 February 2021 3,806 2 View

How was your experience with Biomedical and Biotechnology Journal?

How was your publication experience with BBRJ in terms of peer review and reviewer comments. Did you find it fair and transparent ?

23 February 2021 3,810 6 View

How do i handle Ti and/or Aluminium powder. Since in the instruction on the container is written that CATCHES FIRE SPONTANEOUSLY IF EXPOSED TO AIR ?

i am working on max phase preparation......i am a newly joined PhD scholar. I wanted to make MAX phase of Ti3AlC2 , in most of the literature they are using the metal powder of Ti and Al for the...

23 December 2020 7,122 8 View

Where to find energy consumption per unit volume of wastewater treatment using RO, Micro filtration, nano filtration, ultra filtration etc?

I want to find the energy consumption per unit volume during a waste water treatment processes. It should be comparable and also according to the pollutants concentrations.

13 June 2020 2,592 3 View

What can be the presumable reason for the lower activity of cellulase at 5mM concentration of metal ions than at 2 &10mM concentration ?

I have purified enzymes cellulase and beta-glucosidase and performed SDS-PAGE. Therefore, I have characterized with metal ions at 2mM, 5mM and 10mM but at 5mM concentration lower activity than at...

25 March 2020 8,056 3 View

What is correct context of using alternate rotation method in ANSYS CFX?

I am simulating flow through an axial pump (by specifying total pressure at inlet and static pressure at outlet), so bulk of the flow is moving in the axial direction. I observe some spurious...

11 February 2020 3,928 1 View

No title

It is better if there is table of mechanical properties and complete chemical composition for this alloy, with my best regard.

28 December 2019 2,041 2 View

No title

It is better if there is table of mechanical properties and complete chemical composition for this alloy, with my best regard.

22 December 2019 7,261 3 View

Is the phytochemical examination of the plant before extraction (powder) or after extraction?

I read several research papers and found some of them say phytochemical examination of the plant after extraction, while others are before extraction after grinding the plant. Please Help...

27 September 2019 2,602 4 View

How to publish a patent?

Distinguished researchers .. Please help with how to file and publish an international patent? Many thanks in advance

24 September 2019 2,654 5 View

After a reference from Int J Body Compos Res, can any body help?

Hi, I am after the reference below, my library says it cannot obtain a copy either locally or internationally, any help appreciated! Chris Wang ZM, Heshka S, Wielopolski L, Pi-Sunyer FX, Pierson...

03 March 2021 6,193 1 View

Can we block unwanted images during the x-ray prediction?

i am try to classify the x-ray images. During classification , can i block unwanted images (except x-ray image).

03 March 2021 7,100 1 View

Does anyone know to clarify these changes?

01 March 2021 1,290 2 View

Why do my MCFs not form monolayer?

Hello, I am looking for some expertise on culturing MCF7s. I purchased them from ATCC and I have been following all media and culture conditions. Media is EMEM with 10% FBS and 10ug/mL of...

27 February 2021 3,904 2 View

How to calculate the crystallinity of cellulose film?

27 February 2021 2,753 4 View

What could be the reason for not having further low chi square value (better agreement) in my refinement result?

I have tried every combination of parameter changes and after that i have a poor chi square value. I can't get it lower any further. I know there have been a lot of discussion about Rietveld...

26 February 2021 8,480 3 View

Can anyone share his experience regards Smoothing in origin?

I am working on TiO2 composite material and the results of XRD have a lot of small/junk peaks and while I apply a smooth filter in Origin then the other characteristics peaks disappear so anyone...

26 February 2021 8,183 3 View

How to replicate the well conditions of a crystal hit with 20%(w/v) isopropanol?

I had a crystal hit in a well with 0.1M HEPEs pH 7.5, 10%(w/v) PEG 4000, and 20%(w/v) isopropanol. Why is isopropanol in w/v here if it's just solvent? How do I recreate this well condition?

25 February 2021 9,761 1 View

Is RD-ES grow attached or in suspension or both?

We have a old RD-ES cell line which is grow attached, but we got another vial of RD-ES which is very easy to get detached and grow in sphere in the medium. Do you know which morphology is normal...

24 February 2021 5,183 1 View

What software programs can directly simulate Additive Manufacturing Directed Energy Deposition (DED)?

I understand there are a lot of software programs that can simulate DED by going through specific modeling, simulation, and commands. For me, that was time consuming and results were not accurate....

24 February 2021 4,428 3 View