While making sol - gel , for spin coating deposition of TiO2 i m not getting the transparent gel , how an i get it ?

More Yogesh Singh's questions See All

Can i deposit TiO2 by electrophoretic deposition method ?

Can i deposit TiO2 on ITO glass by electrophoretic method ? how much thickness can i get ? what are the electrodes and the solution used ? i need a discusion on it . thanks

31 December 2019 7,040 3 View

I want to make a teflon reactor for PEC water splitting measurements ?

I want to make a Teflon reactor , with quartz window for Photo-electrochemical characterization having three electrodes . I need help in making can some show me the photo or the sketch how to...

11 December 2019 3,229 6 View

What amount of precursor and solvent i should take to make TiO2 ?

In a research article i read " A sample of 39.5 mg GO was mixed with 13.0mL anhydrous ethanol in a beaker. In synthesis part " I am confused how is the amount 39.5 and 13 ml is decided ? can...

11 December 2019 182 5 View

How is Electrochemical workstation CHI is used in water splitting research ??

my doubt is what is the use of Electrochemical workstation CHI in photocatalytic water splitting. how is it helpful in my research? what are other electrodes (reference etc) ? what are there...

10 November 2019 935 1 View

Protein-aptamer gel electrophoresis help, please??

Hi, I have problems with running gel electrophoresis. I have tried agarose gel electrophoresis and native PAGE. I have two proteins, which have molecular weights of ~30kDa and ~180kDa and two...

03 March 2021 4,275 4 View

Gel electrophoresis result for total RNA samples, 1.5 Agarose gel was used, How to improve the integrity of RNA?

Gel electrophoresis, RNA degradation, RNA extraction from fresh tissue

02 March 2021 5,433 5 View

How to regulate SSCP temperature in simple PAGE?

I'd like to perform single-strand conformation polymorphism (SSCP) in my thesis, however I cannot control the temperature of the vertical PAGE since we are using the conventional tanks. Is there a...

02 March 2021 9,157 1 View

Adherance of Polyaniline coating over stainless steel?

Is the electropolymerisation of polyaniline coating over stainless steel (SS) via Cyclic voltammetry technique is really adherant? Else how to improve the adhesion of the coating, whether any...

01 March 2021 8,220 2 View

Why are my bands weird in this Agarose gel?

Can someone please give me some possible things that could go wrong? Here is my recipe: 0.5g Agarose 50 mL of TAE 1x 1 uL ethyl bromide. Gel was run at 100V for 1 hour. The buffer used is also TAE.

01 March 2021 9,952 3 View

Precipitate after adding laemmli buffer to protein solution containing Potassium Acetate?

Hi, I am running a size exclusion chromatography experiment with a buffer containing Potassium Acetate as a salt. I analyse these fractions through SDS-PAGE. After boiling my SEC fractions in...

01 March 2021 2,622 3 View

Is there a method of determining feed digestibility without the need to re-pellet the feed?

I am aiming to determine the ADC values of a commercial fish feed, but I do not have a steam pelleter or extruder available to me. Ideally, the pellets could be coated with some inert marker....

28 February 2021 7,967 3 View

How to immerse bricks in wax ( for coating ) ?

Do we immerse the bricks horizontally or vertically ? #bricks#waterproofingsurface#civil#engeenering#chemicalengineering#wax#parafinwax

28 February 2021 6,685 2 View

For gelatin coating for culturing HUVEC.Should the gelatin be made in sterile water or PBS? Do I need to autoclave the gelatin soln after making it ?

I want to use 0.1% gelatin. Should that be made in PBS or sterile water? Should I autoclave the gelatin soln after making it in water/PBS?

28 February 2021 274 2 View

Why is my platinum counter electrode getting dirty during electrodeposition?

I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...

27 February 2021 1,829 3 View

Amer Al-Taee

May be you needs to change the concentration

Riaz A. Khan

You have not described the process of sol-gel conversion. The temperature might also be a factor as is the concentration and the minor difference in the process itself.

Yogesh Singh

Riaz A. Khan Amer Al-Taee sir do you feel one can get transperent gel ??

Depends on many factors; yes, one gets transparent gel!

Yes, but you firstly optimize your experiment conditions