Can i deposit TiO2 on ITO glass by electrophoretic method ? how much thickness can i get ? what are the electrodes and the solution used ? i need a discusion on it . thanks
Hi Yogesh,
You probably can benefit from this paper: Article Optimization of ITO glass/TiO2 based DSSC photo-anodes throu...
Hope it helps,
Huy
Hong Huy Tran
its not downloadable
while making sol - gel , for spin coating deposition of TiO2 i m not getting the transparent gel , how an i get it , white precipitate are forming very soon ?
31 December 2019 9,313 5 View
I want to make a Teflon reactor , with quartz window for Photo-electrochemical characterization having three electrodes . I need help in making can some show me the photo or the sketch how to...
11 December 2019 3,354 6 View
In a research article i read " A sample of 39.5 mg GO was mixed with 13.0mL anhydrous ethanol in a beaker. In synthesis part " I am confused how is the amount 39.5 and 13 ml is decided ? can...
11 December 2019 297 5 View
my doubt is what is the use of Electrochemical workstation CHI in photocatalytic water splitting. how is it helpful in my research? what are other electrodes (reference etc) ? what are there...
10 November 2019 1,158 1 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
I need a very narrow glass capillary for my research. How can I make a glass capillary with an inner diameter of around 200 to 500 nanometers?
08 August 2024 8,915 0 View
For example, I perform passivation process before electropolymerization of Py for adhesion to titanium surface. Is a similar or different procedure required for ITO? If necessary, I would be glad...
06 August 2024 3,176 0 View
Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...
06 August 2024 8,716 0 View
I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?
03 August 2024 4,624 3 View
I fabricated Ti3C2Tx using concentrated HF 40%, I plot an XRD as attached image below.. please let to know if I obtained it or not.
02 August 2024 6,789 4 View
What types of mask designs for metal deposition, to be used in a PVD system, are best suited for perovskite-based solar cells?
31 July 2024 4,835 3 View
My screen printed electrode CV is given here. For Nerstean one electron reaction the delta E value should be close to 57 mV and ration of Ic/Ia should be close to 1. I did CV of my screen printed...
30 July 2024 4,671 3 View
Dear Researchers, Is it feasible to distinguish between alpha and alpha prime martensite in the Ti6Al4V alloy under rapid solidification in the as-cast state using XRD, in addition to...
30 July 2024 3,849 0 View
We are working on biopolymeric hydrogels. Our system is highly viscous and sticky, and the gel formed are high in strength. We are unable to use pH electrode and pH strip. Please suggest an easy...
30 July 2024 942 2 View