I need an oil that is inert to Gallium
Try paraffine (= pure alkane) oil; they should be inert to gallium up to 200 °C, provided that no oxygen is present.
three solutions are of cationic, anionic and nonionic surfactant. are there differences in miscibility properties.
01 May 2016 1,931 5 View
So a friend and I will probably get into a project where we try to make mathematical and scientific libraries for Java, possibly in native code. So a few quick questions that come to mind...
12 March 2015 4,392 11 View
I've been looking into fluorescence, and I see a lot of work on the phosphor that we normally talk about, in CFLS, tube lights, etc, but I don't see any optical-to-optical conversion fluorescence...
23 February 2015 6,261 7 View
31 July 2014 8,219 10 View
How can I find out the % of metal character and % of ligand character in a particular MO of a metal complex?I have done a few NBO calculation but It only gives the bonding composition.
27 June 2014 4,622 12 View
From fabrication point of view as well as application point of view?
26 October 2013 3,076 2 View
I want to cool Natural Gas from 195 Kelvin to 138 Klevin in a heat exchanger by using liquid nitrogen as the coolant medium. When entering the heat exchanger, the liquid nitrogen will have a...
01 March 2021 6,450 5 View
I am doing my thesis on the nutrient deprivation on the macroalgae Rhizoclonium sp. I will be analysing the levels over a period of roughly 5 days by HPLC-UV and GC/MS. I will be using seawater as...
28 February 2021 6,477 1 View
I have a tank which contains natural gas at 250 Bar and 293 Kelvin. I want to cool the gas in a dry-ice cooling bath to about 195 Kelvin. The gas will flow in a copper-tube through the bath with a...
27 February 2021 8,128 1 View
I want to do wettability analysis of hydrocarbon oil (octane)/rock/surfactant solution system. but to do the analysis first I have to make rock surface oil-wet. Since hydrocarbon oil does not have...
27 February 2021 5,383 3 View
Hi Guys. I'm a mechanical engineer and have a bit trouble, would be very glad if you could help me with my questions. I have a pressurized tank which contains Natural Gas at 200 Bar and 293...
26 February 2021 6,253 3 View
I am trying to obtain the response and recovery times for my gas sensor device. It appears the the response/recovery times are primarily dependant on the flow rate of the gas I inject into the...
26 February 2021 1,511 3 View
Hi all The question is related to TGA(Thermogravimetric analysis). Thermal degradation easily understood but why do samples weight decrease? altough just binding is broked, the weight of...
26 February 2021 1,100 5 View
Dear All, We are using Autodesk cfd to calculate the air flow in a single sided naturally ventilated room, where air flow depends only on buoyancy due to temperature difference between inside and...
25 February 2021 9,602 4 View
What is the disadvantages of high sulfur content to the ceramic burning process? and what is the effect of outranged viscosity?
24 February 2021 8,219 2 View
Oil and gas companies run gamma ray tool and take readings in API units while Gamma ray is also noted in cps, so how these units can be converted into each other?
24 February 2021 7,545 2 View