Which sheet having high thermal conductivity
Copper sheets have better thermal conductivity but copper price is not economic , so the next option is Aluminium Sheet
chlorine and hydrogen are best gases which are cheap, easily available and have low specific heat
In mechatronics laboratory in one of the experiment PID is used so can we state that
10 November 2016 9,139 0 View
I have uploaded my paper in international conference they have mentioned that they will publish in IEEE explore
10 November 2016 6,901 6 View
Spark plug and other engine casing are made of different materials
10 November 2016 4,774 1 View
basis of properties
10 November 2016 9,691 0 View
parameters
10 November 2016 2,739 3 View
Solar pond
09 October 2016 4,944 8 View
Sir, Kindly notify me if there is any things
01 January 1970 2,545 1 View
Solar pond will be affected by rainfall, wind etc.,
01 January 1970 775 1 View
Fabricated with MS sheet with tickness of 2mm ans insulated with HDPE and themocole and salt having concentration of 35mg/litre
01 January 1970 5,857 1 View
Solar air heater
01 January 1970 9,263 2 View
Hello everyone, I recently submitted an article to Geotechnical Engineering (Proceedings of the ICE), and the current status has been listed as "EiC Pre-assessment: Ready" for the past 20 days. I...
10 August 2024 6,493 1 View
How to develop investments in renewable energy sources?
08 August 2024 5,112 3 View
I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?
03 August 2024 4,624 3 View
I imagine the battery drives the graphite into a carbocation, then chloride is oxidized to donate the electron to the carbocation, but what pushes the lost electrons of chloride to be shared...
03 August 2024 5,384 0 View
I am in search of a modified Hummer's method, which can be used to synthesis graphene oxide within 6-8 hours. As I am a student it is not allowed for us to work after 5 in the laboratory. So I am...
01 August 2024 8,368 2 View
Hello. Thanks for your consideration to see my question. Recently, I conducted XPS anaylsis of g-CN that is prepared from thermal polycondensation of DCDA, so-called conventional bulk-g-CN,...
30 July 2024 9,824 2 View
The starting material is a finely ground powder. Some particles contain more graphene than others.
30 July 2024 3,978 2 View
What should a Mechanical Engineering PhD scholar focus on during their PhD to enhance their chances of securing a postdoctoral position?
29 July 2024 7,714 4 View
In some data sources it has been grouped in Q1 and some shows it is Q2.
29 July 2024 4,227 2 View
I am looking to predict some production for future onshore wind energy production in Portugal, is there any database with info of performances of the existing wind farms in the country? something...
28 July 2024 1,750 1 View